ArduCam OV7670 CMOS 0.3MPx Camera Module

Description

The camera module is powered from a single +3.3V power supply. An external oscillator provide the clock source for camera module XCLK pin. With proper configuration to the camera internal registers via I2C bus, then the camera supply pixel clock (PCLK) and camera data (Data[9:0]) back to the host with synchronize signal like HREF and VSYNC.

The OV7670 camera module is a low cost 0.3 mega pixel CMOS color camera module, it can output 640x480 VGA resolution image at 30fps. The OV7670 camera module build in onboard LDO regulator only single 3.3V power needed and can be used in Arduino, STM32,Chipkit, ARM, DSP , FPGA and etc.

Features

• Optical size 1/6 inch
• Resolution 640×480 VGA
• Onboard regulator, only single 3.3V supply needed
• Standard 0.1inch (2.54mm) pin pitch header connector
• Mounted with high quality F1.8 / 6mm lens
• Output support for Raw RGB, RGB (GRB 4:2:2, RGB565/555/444), YUV (4:2:2) and YCbCr (4:2:2) formats
• High sensitivity for low-light operation
• Low operating voltage for embedded portable apps
• Standard SCCB interface compatible with I2C interface
• Supports image sizes: VGA, CIF, and any size scaling down from CIF to 40×30
• VarioPixel® method for sub-sampling
• Automatic image control functions including: Automatic
• Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic
• Band Filter (ABF), and Automatic Black-Level Calibration (ABLC)
• Image quality controls including color saturation, hue, gamma, sharpness (edge enhancement), and anti-blooming
• ISP includes noise reduction and defect correction
• Supports LED and flash strobe mode
• Supports scaling
• Lens shading correction
• Flicker (50/60 Hz) auto detection
• Saturation level auto adjust (UV adjust)
• Edge enhancement level auto adjust
• De-noise level auto adjust