- Out-of-Stock
Camera module 0.3 Mpx with the Aptina Imaging MT9V111 CMOS sensor with a matrix resolution of 640 x 480 pixels and transmission speeds in the VGA format up to 30 FPS. Adapted to work in low light conditions. Communication via a parallel interface. ArduCAM B0059
Description
The 0.3 MPx CMOS camera module can work in low light conditions. It is equipped with Aptina Imaging MT9V111 sensor (compatible with OV7670 ) offering image transmission in 640x480 VGA resolution at up to 30 frames per second. It can be powered from a single 3.3V power source. Communication with the camera is via a parallel interface. The module can be programmed via the 2-wire interface.
properties
| pin | Name | Description |
|---|---|---|
| 1 | 3.3V | Supply voltage 3.3 V |
| 2 | GND | System weight |
| 3 | SCL | Clock input of the Two Wire serial interface |
| 4 | SDAT | Two Wire serial data line |
| 5 | VSYNC | Vertical sync |
| 6 | HREF | HREF output |
| 7 | PCLK | Clock output of the matrix |
| 8 | XCLK | System clock input |
| 9 | D7 | Video data output - bit 8 (MSB) |
| 10 | D6 | Video data output - bit 7 |
| 11 | D5 | Video data output - bit 6 |
| 12 | D4 | Video data output - bit 5 |
| 13 | D3 | Video data output - bit 4 |
| 14 | D2 | Video data output - bit 3 |
| 15 | D1 | Video data output - bit 2 |
| 16 | D0 | Video data output - bit 1 (LSB) |
Manufacturer
Responsible person
1/9" CMOS VGA (640x480) image sensor with OmniPixel3-HS™ technology. ArduCAM B0070
OV7725 based on Omnivision OV7725 image sensor; low voltage CMOS device provides the full functionality of a single-chip VGA camera and image processor as well as the extraordinary high frame rate and low light performance. It provides full-frame, sub-sampled or windowed 8-bit/10-bit images in a wide range of formats, controlled through the Serial Camera Control Bus (SCCB) interface. ArduCAM U3182
74LVC1T45GW is a compact, single-bit, bidirectional level-shifting transceiver designed for reliable voltage logic translation between low-voltage systems.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 1.5mm and an external diameter of 1.8mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 1.2mm and an external diameter of 1.6mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.7mm and an external diameter of 1mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 1.37mm and an external diameter of 1.8mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.84mm and an external diameter of 1.25mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.6mm and an external diameter of 0.89mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.51mm and an external diameter of 0.8mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.41mm and an external diameter of 0.69mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.33mm and an external diameter of 0.6mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.3mm and an external diameter of 0.55mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.25mm and an external diameter of 0.5mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.24mm and an external diameter of 0.45mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.2mm and an external diameter of 0.4mm.
No product available!
Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.
No product available!
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
No product available!
Camera module 0.3 Mpx with the Aptina Imaging MT9V111 CMOS sensor with a matrix resolution of 640 x 480 pixels and transmission speeds in the VGA format up to 30 FPS. Adapted to work in low light conditions. Communication via a parallel interface. ArduCAM B0059