- Out-of-Stock
Filament ROSA3D PVB 1.75mm Navy Smooth
ID: 587914
5907753131614
ROSA3D filament made of high quality PVB. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PVB Navy Smooth
Description
1.75 mm PVB filament for 3D printing by ROSA3D. 0.5 kg of filament is wound on the spool. The recommended printing temperature is in the range of 200°C to 225°C, and the bed temperature during printing in the range of 65°C to 75°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and high accuracy of the diameter and roundness of the filament.
PVB filament (polyvinyl butyral) from ROSA3D is a polymer that allows you to obtain effective-looking, transparent prints. To achieve this effect, the surface of the finished printout is sufficient to treat with isopropyl alcohol (IPA). The ease of printing makes it suitable even for people starting their adventure with 3D printing. The material is characterized by low shrinkage and no odor. Thanks to the possibility of obtaining a transparent structure, it is perfect for printing a wide range of designer, single-walled items such as vases or lamp shades. Made of PVB, filled figures or sculptures, after surface treatment look as if they were removed from the injection mold.
Please note that PVB filament is hygroscopic. For this reason, it should be stored tightly closed and dried immediately before printing.
Features
- Color: Navy Smooth
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02mm
- Printing temperature: 200°C to 225°C
- Bed temperature: 65°C to 75°C
- Print speed: 60 to 80 mm/s
- Density 1.09 g/cm3
- Odorless smell
- Tensile modulus 2500 MPa
- Heat deformation temperature 55°C (HDT A according to ISO 75)
- Vicat softening temperature 70°C
- Charpy impact strength unnotched, 23°C: 106 kJ/m2; Notched, 23°C: 2 kJ/m2
- Net weight: 0.5 kg
587914
Data sheet
- Rodzaj filamentu
- PVB
- Ilość filamentu
- 0,5 kg
- Diameter
- 1,75 mm
- Colour
- Blue
You might also like
Composition of ingredients prepared especially for cleaning and washing electronic devices. It is a first aid preparation after flooding electronics, It reduces the consumption of 100% isopropyl alcohol, and thus the cost of repair. MICRO CHIP ELEKTRONIC ART.088
zł9.85
24h
Available quantity: 4
Available
Available
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Knife designed for trimming and processing of prints from a 3D printer. It consists of a plastic handle and a replaceable, curved blade made of steel
zł9.40
Delivery date unknown
No product available!
Adhesive increasing the adhesion of 3D prints to the glass table. It makes it easier to work with all materials and prevents undesirable curling of the elements. Dimafix Pen 90ml
zł54.46
24h
Available quantity: 262
Available
Other products in the same category (16)
No product available!
FRAM memory with a capacity of 4kbit by Cypress Semiconductor, communicates via the I2C bus, the power supply voltage is in the range 2.7 - 3.6V. The system has an SOIC8 housing
Retired
No product available!
A small Li-Pol battery with a nominal voltage of 3.7 V and a capacity of 1350 mAh. Leaded wires, dimensions: 5 x 37 x 59 mm. Akyga LP503759
Retired
No product available!
Thermistor for THT assembly with a resistance of 10k, a temperature coefficient of 3380K and accuracy of 1%. The sensor body is Ø2.5x4mm
Delivery date unknown
No product available!
KAmduino UNO is a development board with functionality and dimensions typical for Arduino UNO. Thanks to the built-in ATmega328P microcontroller and the FT231X chipset, the board can be programmed via a USB interface using the Arduino environment. KAmduino UNO
Retired
No product available!
K64 microcontroller with ARM® Cortex®-M4 core, 1MB Flash memory, 256kB RAM, 120MHz, SPI, I2C, I2S, UART, CAN, USB OTG, ADC, DAC, RTC, DMA, LQFP100
Retired
No product available!
SmartLED Shield driver (V4) for SmartMatrix series displays, for use with Teensy 3.2, Teensy 3.5 and Teensy 3.6. It is also possible to connect LED Dotstar or APA102 displays. Adafruit 1902
Retired
No product available!
Add motion, direction and orientation sensing to your wearable FLORA project with this high precision 9-DOF sensors: 3-axis accelerometer, 3-axis magnetometer and 3-axis gyroscope. Adafruit 2020
Retired
No product available!
Ambient Light Sensor, SI1145, connects to the I2C bus pads. Adafruit 1981
Retired
No product available!
Extension for Raspberry Pi; communication module with RS-485 interface (DEV-13000). Module with the possibility of mounting the DB-9 socket, the socket should be purchased separately
Retired
No product available!
FreeSoC2 board has two processors on-board: a CY8C5868LTI-LP039 and a CY8C5888AXI-LP096. The former serves as a debugger/programmer for the latter, which is the target upon which your application code will be installed. Both parts contain a Cortex-M3 processor core, 256kB of flash memory, 64kB of SRAM, and 2kB of EEPROM. DEV-13229
Retired
No product available!
32-bit microcontroller with ARM Cortex-M4 core, XMC4200 family, 256kB Flash, VQFN-48, Infineon
Retired
No product available!
Aluminum extensometer beam, allowing measurement of weight up to 1 kilogram. It has four wires. It is used in kitchen scales and portable scales.
Retired
No product available!
Aluminum extensometer beam, allowing weight measurement up to 3 kilograms. It has four wires. It is used in kitchen scales and portable scales.
Retired
No product available!
Aluminum extensometer beam, allowing mass measurement up to 5 kilograms. It has four wires. It is used in kitchen scales and portable scales.
Retired
No product available!
The set allows introducing distance, ambient lighting and gesture analysis into the subject using the VL6180X sensor. NUCLEO-L053R8 plate in set with VL6180X expansion board. P-NUCLEO-6180X2
Retired
No product available!
ROSA3D filament made of high quality PVB. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PVB Navy Smooth