- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
Tube HiFi stereo 3W + 3W (red)
ID: 588128
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω
Description
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. It allows you to adjust the volume using the built-in potentiometer and give a "sweet" sound color characteristic for devices with vacuum tubes. The amplifier allows you to connect two audio input channels through RCA connectors and outputs in the form of 3 W speakers and 4 Ω or 8 Ω impedance through banana connectors. It is powered by AC 230 V mains voltage via an IEC C14 socket (standard power socket used, for example, in computers).
The electronic module has been placed in a nice, aluminum housing, so it can be used not only as part of the audio system, but also as an element of decor. It is a good choice for both novice users and audiophiles.
Features
- Stereo amplifier
- Type: tube 6P1 (power amplifier), 6J1 (voltage amplifier)
- Frequency response: 30 Hz to 40 kHz (-1dB)
- Input sensitivity: 500 mV
- SNR: 80 dB
- Adjusting the volume level
- Input impedance: 10 kΩ
- Output power: 2 x 3 W with an impedance of 4 Ω or 8 Ω
- Input: RCA connectors
- Output: banana connectors
- Power switch
- Red colour
- Power supply: AC 100 to 250 V (IEC C14 socket)
- Dimensions: 124 x 132 x 166 mm
Kit contains
- HiFi tube amplifier
- 2 x 6P1
- 2 x 6J1 lamp
588128
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
A stereo tube preamplifier based on 6K4 tubes. Designed for use with active speakers or an additional amplifier and passive speakers. SUCA-AUDIO TUBE-T1
zł253.08
24h
Available quantity: 2
Available
The Lanberg audio cable with a length of 500 cm enables stereo sound transmission via 3.5 mm minijack and 2x RCA (Chinch) connectors, ensuring compatibility with a wide range of devices such as computers, smartphones, TVs, and multimedia players. With high-quality craftsmanship, nickel-plated contacts, and a plastic braid, it guarantees excellent signal conductivity, minimal interference, and reliability. Its solid construction makes it suitable even for more demanding users. CA-MJRC-10CC-0050-BK
zł4.71
24h
Available quantity: 4
Available
Other products in the same category (16)
Digital tuner for terrestrial TV reception in DVB-T, DVB-T2 HEVC and DVB-C standards on notebooks and computers. Rebel KOM1060
Retired
No product available!
Brushless motor driver dedicated to Arduino. It can handle drives with a control voltage from 9 V to 24 V DC and provide currents up to 20 mA. Seeed Studio 105030027
Retired
No product available!
A bionic robot dog that is an ideal tool for learning programming and studying the movement of four-legged robots. Thanks to a dedicated Arduino board that coordinates movements, you can connect various sensors to get additional interaction with the environment. Seeed Studio 114992499
Retired
No product available!
The LoRa omnidirectional antenna is made of fiberglass. It has an average gain of 5 dBi and works in the frequency range from 860 to 930 MHz. Seeed Studio 318020612
Retired
No product available!
Heat sink dedicated to the NanoPi NEO minicomputers. Comes with thermopad. FriendlyELEC NanoPi NEO Heat Sink
Retired
No product available!
USB adapter for a computer working as a 2-channel oscilloscope, 34-channel logic analyzer and a programmable signal generator. Digilent 411-001
Retired
No product available!
USB adapter for a computer working as a 2-channel oscilloscope, 34-channel logic analyzer and a programmable signal generator. BNC probes included. Digilent 471-058
Retired
No product available!
Aluminum enclosure dedicated to the Ettus USRP B205mini-i. It protects the plate against mechanical damage by increasing the operating temperature range. Digilent 6002-240-011
Retired
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Digilent 6002-410-022
Retired
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Comes with a enclosure. Digilent 471-044
Retired
No product available!
Aluminum enclosure dedicated to the Ettus USRP B200mini. It protects the plate against mechanical damage by increasing the operating temperature range. Digilent 6002-240-012
Retired
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX75 FPGA chip. Digilent 6002-410-023
Retired
No product available!
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 100 kS/s. Digilent 6069-410-008
Retired
No product available!
DAQ device based on USB communication and equipped with 8 single-end analog inputs, two analog outputs, 8 digital I/O and one 32-bit counter. It offers 12-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-009
Retired
No product available!
USB-based DAQ device with 16 single-ended or 8 differential analog inputs, 8 digital I/O, and two counter inputs and one output. It offers 16-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-010
Retired
No product available!
USB-based DAQ device with 16 single-ended or 8 differential analog inputs, two analog outputs, 8 digital I/O, and two counter inputs and one output. It offers 16-bit resolution and a sampling rate of 500 kS/s. Digilent 6069-410-011
Retired
No product available!
HiFi stereo tube amplifier based on 6J1 and 6P1 tubes. Designed for use with loudspeakers up to 3 W and an impedance of 4 Ω or 8 Ω