.png)
- Out-of-Stock
Filament ROSA3D PLA-Silk 1.75mm Blue
ID: 588218
5907753131706
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Blue
Description
1.75 mm PLA-Silk filament for 3D printing by ROSA3D. 0.8 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA-Silk is a durable and easy-to-use filament characterized by intense color and exceptional gloss. It is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a mixture of plastics based on the biodegradable PLA biopolymer. It was made only of ingredients approved for contact with food. PLA-Silk can be printed with the same settings as PLA Starter. There is no need to slow down the printing speed. The filament is shiny already on the spool, the gloss does not only arise during printing, so it allows quite a lot of freedom in choosing the temperature. Nevertheless, we always recommend that you print the temperature tower first.
Features
- Color: Blue
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 0.8 kg
588218
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 0,8 kg
- Diameter
- 1,75 mm
- Colour
- Blue
You might also like
3D printer with a filament sensor and colorful LED backlight. For self-assembly, included with the necessary accessories. BIQU B1
Regular pricezł1,099.01zł639.60
24h
Available quantity: 3
Available
Other products in the same category (16)
MYIR MYS-7Z0007S-C - KIT is a set of elements with a single board computer based on the Xilinx XC7Z007S-1CLG400C (Zynq-7007S) system. This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
MYIR MYS-7Z0007S-C is a single board module based on the Xilinx XC7Z007S-1CLG400C chip (Zynq-7007S). This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
MYIR MYIR MYS-7Z010-LC is a set of elements with a single board computer based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) system. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
MYIR Z-turn Lite MYS-7Z010-LCS is a single board module based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) chipset. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
Z-turn IO Cape extension board is an extension board for Z-turn series tiles based on Xilinx Zynq
Retired
No product available!
No product available!
OLED display 128x64 pixels, 0.96 ", 3V power supply, SSD1306 controller, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. CAP
Retired
No product available!
ODROID-HC2 is a mini PC with Samsung Exynos5422 Cortex-A15 2Ghz and Cortex-A7 Octa core CPUs
Retired
No product available!
No product available!
The module contains an input for SD cards and MicroSD cards. Waveshare SD Storage Board
Retired
No product available!
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
Retired
No product available!
Waveshare AlphaBot, a basic set for building an Arduino-based robot
Retired
No product available!
IMU inertial sensor, 10-axis, barometer with temperature compensation, low energy consumption
Retired
No product available!
RTC clock module with DS1302 chip and battery socket
Retired
No product available!
No product available!
The Open746I-C development board has been designed for the capabilities of the STM32F746IGT6 microcontroller, includes a motherboard and a Core746I microcontroller board. Waveshare Open746I-C Package B
Retired
No product available!
ROSA3D filament made of high-quality PLA-Silk granules characterized by intense color and exceptional gloss. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. Filament ROSA3D PLA-Silk Blue