Environment Sensor HAT - module with environmental sensors for Raspberry Pi

Description

Module with environmental sensors designed to work with the Raspberry Pi. It combines the TSL25911FN for illuminance measurement, BME280 for temperature, humidity and pressure measurement, ICM20948 (3-axis accelerometer, 3-axis gyroscope and 3-axis magnetometer), LTR390-UV-1 for UV detection and SGP40 sensor for detection of volatile organic compounds (VOC). The module is powered by 5V and has extended pins, so it can be stacked. Communication takes place via the I2C interface. It will be used in the projects of mobile robots, drones and weather stations. Full documentation with examples is available on the product wiki page.

Features

• Light intensity sensor TSL25911FN:
  • Measuring range: 0 to 88,000 Lux
  • I2C address: 0x29
• Temperature, humidity and pressure sensor BME280:
  • Temperature measurement range: -40 to 85 ℃ (resolution 0.01 ℃, accuracy ± 1 ℃)
  • Humidity measuring range: 0 to 100% RH (0.008% RH resolution, ± 3% RH accuracy, 1s response time, delay ≤ 2% RH)
  • Pressure measurement range: 300 to 1100 hPa (resolution 0.18 Pa, accuracy ± 1 hPa)
  • I2C address: 0x76
• ICM20948 9-DoF Sensor:
  • Accelerometer:
    • Resolution: 16 bit
    • Measuring range (configurable): ± 2, ± 4, ± 8, ± 16g
    • Working current: 68.9 uA
  • Gyroscope:
    • Resolution: 16 bit
    • Measuring range (configurable): ± 250, ± 500, ± 1000, ± 2000 °/sec
    • Working current: 1.23 mA
  • Magnetometer:
    • Resolution: 16 bit
    • Measuring range: ± 4900 µT
    • Working current: 90 uA
  • I2C address: 0x68
• UV sensor LTR390-UV-1:
  • Wavelength detection range: 280 nm to 430 nm
  • I2C address: 0x53
• VOC sensor SGP40:
  • Measuring range: 0 to 1000 ppm
  • Response time: <10 s
  • Start time: <60 s
  • I2C address: 0x59
• Voltage: 5V
• Dimensions:  65 x 30 mm

Kit contains

• Environment Sensor HAT
• 2x20 pin female connector
• 4-pin male connector
• A set of screws