New products
New products
Available
Available
Available
Available
Available
Available
Thing Plus - WiFi/Bluetooth module with ESP32 WROOM
ID: 581400
5906623418022
zł118.28
Tax included
zł96.16 tax excl.
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663
Description
Module with WiFi and Bluetooth Espressif ESP32 WROOM with ESP32-D0WDQ6 core. ESP32 Thing plus integrates a rich set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. Thanks to the built-in ESP32 WROOM module, SparkFun Thing Plus has 16MB of flash memory, 520kB of internal SRAM memory, integrated 802.11 BGN WiFi transceiver and dual Bluetooth mode and a JST-PH 2.0 connector for connecting a LiPo battery.
The module offers a lot of possibilities in the field of IoT systems and can be used both to control LEDs and to transfer data to a specific platform. Thing Plus can also be programmed using the Arduino IDE and a special library.
Features
- Processor and memory
- Dual-core 32-bit Xtensa® LX6 microprocessor, up to 600 DMIPS
- Clock frequency: up to 240 MHz
- 520 KB of SRAM
- 16 MB Flash memory
- Peripheral interfaces
- 12-bit SAR ADC 13 channels
- Converters 2 × 8-bit DAC
- 8 x Touch sensors
- Temperature sensor
- 3 × SPI
- 2 × I2S
- 2 × I2C
- 3 × UART
- SD / SDIO / MMC memory controller
- CAN 2.0
- 16 x PWM
- Hall sensor
- Connectors:
- GPIO - 21 pin
- MicroUSB connector
- 2.0mm JST-PH connector
- Qwiic connector
- AES, SHA2, ECC, RSA-4096 encryption
- Power supply 2.3 to 3.6 V
- Dimensions: 58.42 x 22.86 mm
581400
Data sheet
- Microcontroller
- ESP32
- Flash memory
- 16 MB
- Number of I/O
- 21
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- Yes
- MicroSD slot
- No
- Length
- 58,4 mm
- Width
- 22,8 mm
- USB connector type
- microUSB type B
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
USB cable (type A) - microUSB (type B) used to connect the computer with devices equipped with microUSB-B sockets. Length: 1m
zł6.16 24hAvailable quantity: 15 AvailableComprehensive development platform for Espressif ESP32 a WiFi-compatible microcontroller and nearly 30 I/O pins. DEV-13907
zł118.39 24hAvailable quantity: 3 AvailableEspressif ESP32 is an integrated circuit that combines Wi-Fi functionality and Bluetooth 4.0 BLE. Integrated 32-bit, dual-core Xtensa LX6 processor, 448kB ROM, 520kB SRAM. ESP32 allows you to work with many interfaces, including SPI, I2C, UART, CAN, ETH, IR and can be powered by 2.2V-3.6V. The system has a housing QFN48 (6x6mm). ESP32 Chip
zł16.91 24hAvailable quantity: 5 Available
Other products in the same category (16)
Development board based on the u-blox NORA-W306 module, offering dual-band WiFi and Bluetooth Low Energy. Equipped with a microcontroller with two Arm Cortex-M33 and Cortex-M23 cores, ideal for battery-powered IoT projects. It offers USB Type-C, microSD, JST for LiPo batteries, and 20 GPIO pins, supports a variety of communication interfaces, and allows easy integration with the Qwiic system and programming via Arduino IDE. SparkFun WRL-21637
zł209.86 24hAvailable quantity: 2 AvailableEvaluation kit with Sparkfun Artemis Bluetooth 5.0 module designed on the basis of the Feather kit. It has a USB C. The board also has a USB-UART converter, a microphone and a JTAG debugging connector. Artemis has support in the Arduino IDE. SparkFun WRL-15574
zł123.89 24hAvailable quantity: 1 AvailableDevelopment board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
zł68.83 24hAvailable quantity: 3 AvailableThe board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745
zł125.42 24hAvailable quantity: 3 AvailableDevelopment kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15435
zł249.49 24hAvailable quantity: 1 AvailableDevelopment board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
zł361.48 3 weeks No product available!
Board with the DA16200 WiFi module. It is equipped with a Qwiic connector and is an excellent solution for IoT projects. SparkFun WRL-19696
zł180.15 24hAvailable quantity: 2 AvailableModule with WiFi Espressif ESP32-S2 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, SPI, UART, I2S and I2C. SparkFun WRL-15663
zł113.18 24hAvailable quantity: 3 AvailableDevelopment kit with XBee3 Micro radio module. Provides plug and play 802.15.4 2.4 GHz wireless connection (Zigbee 3.0 protocol). SparkFun WRL-15454
zł281.13 24hAvailable quantity: 1 AvailableModule with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripherals - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, SPI, UART, I2S and I2C. SparkFun WRL-20168
zł129.94 24hAvailable quantity: 4 AvailableDevelopment kit with ATSAMD51J20 microcontroller with ARM Cortex M4F core. It is clocked at 120 MHz, has 1 MB of Flash and 256 KB of SRAM. There are 6 SERCOM interfaces on the board. SparkFun DEV-14713
zł149.05 24hAvailable quantity: 1 AvailableThe board is equipped with the STM32F405 microcontroller with the ARM Cortex-M4 core and SPI Flash memory, 20 GPIO pins, SD card slot, pins for connecting the battery with the charging and voltage stabilization circuit, JTAG connector and Qwiic socket. SparkFun DEV-17712
zł149.38 24hAvailable quantity: 2 AvailableA development board featuring the ESP32-C6 WROOM-1-N16 module from Espressif. It features a single-core RISC-V processor and a wide range of connectivity options, including 2.4 GHz WiFi 6, Bluetooth 5.3, Zigbee, and Thread (802.15.4). The module is Feather-compatible and provides 23 GPIO pins on 2.54 mm pitch connectors. SparkFun DEV-22924
zł110.36 24hAvailable quantity: 2 AvailableDevelopment board with Renesas RA6M5 microcontroller, running at 200 MHz with built-in Flash memory and easy sensor connection thanks to Feather form factor and Qwiic connector. Equipped with Bluetooth Low Energy connectivity and SmartBond technology - CodeLess AT command Datapump, the board allows easy configuration without the need for reprogramming, making it suitable for both beginners and advanced users. SparkFun WRL-24243
zł283.28 24hAvailable quantity: 1 AvailableDevelopment kit with nRF9160 microcontroller with ARM Cortex M33 core. Equipped with 1MB Flash and 256KB RAM, it can support CAT M1 LTE and NB-IoT cellular communication. SparkFun WRL-17354
zł1,013.38 3 weeks No product available!
A development board that combines the u-blox NINA-B306 Bluetooth module, the ISM330DHCX 6DoF IMU sensor, and the BME280 atmospheric pressure sensor. It has a built-in Qwiic connector and LiPo battery connector as well as a charger and LiPo parameters monitor. SparkFun WRL-20854
zł499.00 3 weeks No product available!
Module with WiFi and Bluetooth Espressif ESP32 WROOM. It integrates a set of peripheral devices - capacitive touch sensors, Hall sensors, SD card interface, Ethernet, fast SPI, UART, I2S and I2C. SparkFun WRL-15663