SEQURE SQESC 2670 - ESC controller 2-6S 70A AM32
ID: 1205236
5902186337633
zł159.14
Tax included
zł129.38 tax excl.
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32
Description
SEQURE SQESC 2670 is an advanced brushless motor ESC designed for a wide range of RC applications, including FPV drones, multirotors, RC airplanes, boats, and off-road vehicles. The device is equipped with a powerful 32-bit STM32G071 processor operating at up to 64 MHz, ensuring very fast and precise motor control. Support for PWM frequencies up to 128 kHz enables smooth, responsive operation and high drive efficiency. The use of high-current MOSFET transistors and a metal heatsink allows for effective heat dissipation.
SEQURE SQESC 2670 offers wide compatibility thanks to support for DShot (all variants), PWM, Oneshot, and Multishot protocols, enabling operation with most flight controllers. Automatic throttle signal detection at startup simplifies configuration and speeds up setup. The built-in protection system, including low voltage, overheating, motor stall, and overcurrent protection, increases operational safety and protects components.
Advanced configuration options are available via a visual programming tool, allowing adjustment of parameters such as motor timing, throttle calibration, rotation direction, and response characteristics. Additionally, the device features programmable RGB LED lighting, enabling visual customization. Thanks to its versatility and high performance, SEQURE SQESC 2670 is an excellent choice for demanding users looking for a reliable ESC for various RC applications.
Features
- Processor: STM32G071
- Input voltage: DC 7V to 25.2V (2 to 6S LiPo)
- Continuous current (with proper cooling): 70A
- Peak current (with proper cooling): 110A
- Supported firmware: AM32
- Supported protocols: DShot (All), PWM, Oneshot, Multishot, etc.
- Programmable parameters
- Throttle calibration
- Timing adjustment
- Current sensing
- Telemetry signal
- Motor rotation direction settings
- RGB LED lighting
- Dimensions: 190 × 18 × 11 mm
- Weight: 22 g
1205236
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 940W and a current of up to 37.3A, allowing for aggressive flights while maintaining reliability. SEQURE S2207 BLDC 6S 1850KV
zł92.83
24h
Available quantity: 3
Available
A brushless FPV motor designed for racing and long-range applications, offering high efficiency and dynamic throttle response. Its 22x7mm 12N14P design with high-quality copper windings and a 14-pole rotor ensures stable and smooth operation under heavy loads. The motor operates in the 4-6S LiPo/LiHV range, reaching a maximum power of 1134W and a current of up to 45A, allowing for aggressive flights while maintaining reliability. SEQURE S2207
zł93.53
24h
Available quantity: 3
Available
Other products in the same category (16)
Two-channel driver for DC motors with an operating voltage from 7 to 45 V and a continuous current of up to 60 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS60
zł788.79
4 weeks
No product available!
Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A
zł1,162.14
4 weeks
No product available!
Brushless motor driver module (ESC regulator) with current efficiency up to 20 A. Uses BLHeli_S software
zł36.38
4 weeks
No product available!
Driver module for two DC brushed motors with current efficiency up to 5 A per channel. It can work with LiPo 2S and 3S packets
zł64.39
4 weeks
No product available!
The bidirectional ESC controller enables precise control of brushed DC motors within a voltage range equivalent to 1S–2S Li-Ion/Li-Po packs. Its small size and compatibility with classic RC signals facilitate applications in compact mobile designs and robotic projects with limited mounting space
zł17.31
4 weeks
No product available!
The ESC RC controller module is designed for brush motors with a supply voltage from 3.5 to 6 V and a capacity of 1 A
zł8.61
24h
Available quantity: 30
Available
ESC RC controller module with FlySky receiver designed for two brush motors with a supply voltage from 2.5 to 5 V and a current consumption of 2 A
zł146.80
4 weeks
No product available!
Brushless motor driver module (ESC regulator) with current efficiency up to 30 A
zł45.30
24h
Available quantity: 20
Available
Brushless motor driver module (ESC regulator) with current efficiency up to 35 A
zł55.94
24h
Available quantity: 6
Available
Brushless motor driver module (ESC regulator) with current efficiency up to 45 A
zł67.90
24h
Available quantity: 10
Available
ESC RC controller module with FlySky receiver. It allows you to control two motors in two directions and one motor in one direction. Dasmigro 2.4G 7CH
Regular pricezł114.59zł81.04
24h
Available quantity: 2
Available
Two-channel ESC controller for brushed motors. It can deliver 40 A and has wires terminated with an XT60 connector
zł92.50
24h
Available quantity: 2
Available
ESC type controller for a DC motor with a supply voltage of 3.7 V to 5 V. It offers a maximum output current of up to 1.5 A and allows you to control two motors independently
zł60.61
4 weeks
No product available!
Miniature ESC type controller for a DC motor with an input from 3.7 V to 5 V. Offers an additional output current of up to 1.5 A and allows you to control the motor in a channel mixing device
zł64.64
4 weeks
No product available!
An advanced speed controller designed to power three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12V to 56V. Maximum constant current is 60A. Makerbase ODrive-S
zł293.93
24h
Available quantity: 4
Available
The ODrive3.6 ESC speed controller is designed to power two three-phase brushless motors in various applications, such as driving robots, walking robots or gimbals. Supports input voltage range from 12 V to 56 V and maximum current up to 60 A. Makerbase ODrive3.6
zł412.95
24h
Available quantity: 10
Available
Brushless ESC speed controller designed for FPV drones and RC models. Equipped with a 32-bit STM32G071 processor and PWM support up to 128 kHz, it ensures smooth and responsive motor operation. It supports DShot, PWM, Oneshot, and Multishot protocols, offering broad compatibility with flight controllers, as well as a continuous current of 70 A and a maximum current of 110 A. It has a built-in adjustable BEC (5-12 V). SEQURE SQESC 2670 AM32