- Out-of-Stock
Turnigy Multistar 45 Amp Multi-rotor Brushless ESC 2-6S (OPTO)
ID: 226197
Turnigy Multistar 45 A - Brushless motor controller for 2-6S multirotors (OPTO) (HK27777)
Turnigy Multistar 45 A - Brushless motor controller for 2-6S multirotors (OPTO) (HK27777)
MultiStar ESCs speed controllers offer high quality and are also inexpensive! Designed for simple structures and easy to assemble controllers, they proved to be ideal for multirotors.
The controller is characterized by smooth development of power without limiting power. Security is also not neglected by equipping the controller with LVC (Low Voltage Cut-off), overload protection in the event of a motor lock, protection in the event of a lack of control signal and safe arming.
Multistar controllers are factory equipped with Gold connectors adapted to the current range of the regulator.
Functions:
• Linear power control
• Quick reaction
• Atmel microcontroller
• Protection in the event of engine blockage
• Protection in the event of signal loss
• Safe startup
• Ability to control 480 Hz + signals (up to 499 Hz)
• Possibility to use the programming card
Specification:
Continuous current: 45 A
Power supply: 2-6S Lipo
BEC: No (OPTO)
PWM: 8 kHz
Max. RPM: 240000 rpm for a 2-pole brushless motor
PCB size: 50 mm x 30 mm
Power connector: male 4 mm
Motor connector: female 4 mm
Weight: 63 g
PRODUCT ID: 9351000009
226197
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
HK Body clips A (10Pcs/Bag) - 110BS, A2003, A2010, A2027, A2029, A3007 and A3015 (14125)
Retired
No product available!
No product available!
No product available!
The ST25TA02KB-P is a dynamic NFC/RFID tag IC with a digital General Purpose Output (GPO), embedding a 2 Kbit EEPROM that supports NDEF tag applications for NFC Forum Type 4
Retired
No product available!
Low-cost development board based on the Xilinx Zynq®-7000 All Programmable SoC, RoHS
Retired
No product available!
No product available!
Retired
No product available!
A miniature linear actuator that has a stroke range of up to 80 mm at a speed of 3 to 5 mm/s. It has a built-in motor and is powered by a voltage of 3 to 6 V
Retired
No product available!
Bluetooth audio receiver module that allows wireless transmission of sounds. It is equipped with a PCB antenna and edge connectors
Retired
No product available!
No product available!
No product available!
No product available!
Cable ties are made of flexible plastic characterized by its high durability, both mechanical and thermal. Lanberg ORG01-BVP150-MC3
Retired
No product available!
The module with the DS18B20 sensor is used to measure the temperature in the range from -55° C to + 125° C, with an accuracy of +/- 0.5° C in the range from -10° C to + 85° C. The module communicates via the 1-Wire interface, thanks to which it can be connected using 2 or 3 wires - depending on the configuration. Temperature measurement can be performed with an accuracy of 9 to 12 bits. MOD-31.Z
Retired
No product available!
Universal EEPROM, Flash NAND, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. TL866II Plus
Retired
No product available!
No product available!
Turnigy Multistar 45 A - Brushless motor controller for 2-6S multirotors (OPTO) (HK27777)