MLX90640 IR Thermal Camera - module with MLX90640 thermal imaging camera (FoV 110°)
ID: 587272
5906623430444
zł581.83
Tax included
zł473.03 tax excl.
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 110°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4469
Description
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 110°. It enables temperature measurement in the range from -40°C to 300°C with high accuracy up to 1.5°C. The infrared thermal imaging camera is equipped with a sensitive heat sensor that can detect slight differences in the temperature of objects in the environment. It then collects radiation information from the objects and creates an electronic image (32x24 field matrix). The board is equipped with a STEMMA QT connector and communicates via the I2C interface. It is supplied with the voltage from 3.3 V to 5 V. Full documentation of the module with examples of use is available on the product page.
Attention!
To operate the module, a chip with at least 20 KB of RAM is required.Features
- Sensor: MLX90640
- Resolution: 32x24
- FoV: 110°x70°
- Temperature measurement range: -40 ? to 300 ?
- Refresh rate: 0.5Hz to 64Hz
- I2C interface
- I2C address: 0x33
- Supply voltage: 3.3 to 5 V
- Current consumption: 18 mA
- Dimensions: 25.7 x 17.7 x 16 mm
Kit contains
- MLX90640 IR Thermal Camera
- Straight 5-pin male goldpin connector
587272
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The long-awaited Raspberry Pi 4 model B with the SoC Broadcom BCM2711 SoC (4 x Cortex-A72) running at 1.5GHz, 4 GB LPDDR4 RAM and the Broadcom VideoCore VI graphics chip
zł252.90
Delivery date unknown
No product available!
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł10.39
24h
Available quantity: 5
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.96
24h
Available quantity: 10
Available
Other products in the same category (16)
ATECC608A cryptographic chip module. Enables adding strong security to an IoT node, edge device or embedded system. Adafruit 4314
zł24.96
4 weeks
No product available!
Module with a voltage level converter from 5 V to 3.3 V, intended for use in the STEMMA QT/Qwiic system. It has a built-in voltage stabilizer providing 3.3 V power supply with a current of up to 500 mA. Adafruit 5637
zł15.13
24h
Available quantity: 7
Available
ToF distance sensor module based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. Adafruit 3316
zł82.82
24h
Available quantity: 1
Available
Clock signal generator with a frequency of 8 kHz to 160 MHz based on the SI5351A integrated circuit. Communication with the module takes place via the I2C bus. Adafruit 5640
zł41.21
24h
Available quantity: 5
Available
Module with a 6-axis IMU sensor (accelerometer and gyroscope) that allows you to measure acceleration and rotational speed in a wide range of ±30g and ±4000dps. Communicates via I2C. Adafruit 4464
zł71.40
24h
Available quantity: 1
Available
Module with acceleration and rotational speed sensor based on the LSM6DSO32 chip. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4692
zł72.24
24h
Available quantity: 2
Available
A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027
zł26.38
24h
Available quantity: 3
Available
I2C bus amplifier module based on the LTC4311 system. It enables communication via a popular interface over much longer distances while maintaining high transmission speeds. Adafruit 4756
zł36.86
24h
Available quantity: 8
Available
Module with an absolute pressure sensor LPS25HB. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4530
zł56.47
24h
Available quantity: 2
Available
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 55°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4407
zł400.03
24h
Available quantity: 2
Available
Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810
zł36.85
24h
Available quantity: 3
Available
Module with 3-axis ADXL375 accelerometer with a wide measurement range up to ±200g. The board is equipped with a STEMMA QT connector and communicates via the I2C or SPI interface. Adafruit 5374
zł127.51
24h
Available quantity: 1
Available
Module with an RFID tag based on the ST25DV16K chip. It can be reprogrammed via the I2C bus. Equipped with STEMMA QT connector and PCB antenna. Adafruit 4701
zł19.91
24h
Available quantity: 2
Available
Module with a precise real time clock (RTC) DS3231. It has an integrated crystal resonator and communicates via the I2C interface. Adafruit 5188
zł78.81
24h
Available quantity: 2
Available
Module with CO2, temperature and humidity sensor SCD-41. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5190
zł486.45
24h
Available quantity: 1
Available
Module with 12-channel MPR121 capacitive touch sensor. The board is equipped with a Stemma QT connector and communicates via the I2C interface. Adafruit 4830
zł36.97
24h
Available quantity: 3
Available
Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 110°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4469