- Out-of-Stock
Step-Down Buck Voltage Regulator 2,5-7,5V 300mA D24V3ALV
ID: 195861
The Step-Down D24V3ALV Buck Voltage Regulator module with adjustable output voltage in the range of 2.5-7.5V with a wide input voltage range of 4.5-42V and a maximum output current of 300 mA. Pololu 2101
Description
The Step-Down D24V3ALV buck voltage regulator module with adjustable output voltage in the range of 2.5-7.5V and wide input voltage range of 4.5-42V. The maximum current load of the module is 300 mA. The converter achieves a standard efficiency of 80% at similar values of input and output voltage.
Note! The board does not have reverse-voltage protection. Incorrect power connection will cause permanent damage of the module.
The inverter module is also available in version with output range 4-25V
Features
- Input voltage: 4.5-42 V
- 2.5-7.5V adjustable output voltage with 4% accuracy
- Type. maximum current: 300 mA
- Built-in protection against short-circuit and overheating
- Type. efficiency: 80%
- Size: 15 × 10 × 4 mm
- Possibility of mounting goldpin
Connections
- VIN - power input (4.5-42V)
- GND - mass
- VOUT - output
- SHDN – Shutdown pin can be driven low (under 0.3 V) to turn off the output and put the board into a low-power state that typically draws 20 μA, and it can be driven high (above 2.3 V) to enable the board. If you do not need to use the shutdown feature, the SHDN pin can be directly connected to VIN to permanently enable the board. You should not leave this pin disconnected as this can result in unpredictable behavior.
Kit contains
- Buck converter module D24V3ALV x1
- Goldpin connector 4pin straight x1
- Goldpin connector 4pin right-angle x1
195861
Data sheet
- Output voltage
- 2,5 - 7,5 V
- Output current
- 300 mA
- Converter type
- Step-down
- Supply voltage min
- 4,5 V
- Supply voltages max
- 42 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Male terminal block, angled, 11-pin. Pitch 3.81mm. Height 7mm. 15EDGRC
Retired
No product available!
No product available!
SmartDriveDuo MDDS30 - two-channel driver for DC motors
Retired
No product available!
No product available!
Module with a temperature sensor designed for the M5Stack sets. It allows you to measure high temperatures. The set includes a K-type thermocouple probe. M5Stack U133
Retired
No product available!
No product available!
No product available!
No product available!
No product available!
No product available!
MKII version AVR Mini with USB connector is the equivalent of a more extensive programmer MKII AVR PRO and is fully compatible with AVRISP-MKII. It can be used to program microcontrollers from the AVR family: ATtiny, ATmega and ATxmega. It is equipped with two ISP / PDI / TPI 2 x 3 pin connectors
Delivery date unknown
No product available!
No product available!
Pmod DPG1 is a module with a differential pressure sensor, based on the NXP MP3V5010DP system. The PCB also includes an analogue-digital ADCS7476 converter from Texas Instrument. The module allows to detect the pressure difference between two ports. The SPI interface is used for communication with the module. Digilent 410-333
Retired
No product available!
No product available!
PROGRAMMED 4-CHANNEL COMPARATOR / METER TERMINAL - PLATES AND PROGRAMMED SYSTEM
Retired
No product available!
This gearmotor consists of a high-power, 12V brushed DC motor combined with a 74.83:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 3591.84 counts per revolution of the gearbox’s output shaft. Pololu 3218
Retired
No product available!
The Step-Down D24V3ALV Buck Voltage Regulator module with adjustable output voltage in the range of 2.5-7.5V with a wide input voltage range of 4.5-42V and a maximum output current of 300 mA. Pololu 2101