.png)
- Out-of-Stock
X-NUCLEO-IDW01M1 - expansion board with WiFi module
ID: 560892
Shield for STM32 Nucleo with WiFi module b / g / n SPWF01SA. The module's firmware allows you to work as a client and UDP / TCP server, a web server, supports TCP / IP, TLS / SSL protocols. There are 16 GPIO lines available
Description
X-NUCLEO-IDW01M1 is a WiFi shield with the SPWF01SA module designed for use with STM32 Nucleo plates . The SPWF01SA module has CE, IC and FCC certificates, is energy-saving, operates in WiFi networks b / g / n, has a built-in SMD antenna. The SPWF01SA module is equipped with 1 MB Flash memory, thanks to which there is the possibility of wireless firmware updates (over-the-air). The module's firmware contains an IP stack, can create up to 8 TCP / UDP sockets, can generate dynamic Web pages (SSI) and use the REST API (get and post methods) to receive and transfer data to the cloud. The module can work simultaneously as a server and a client. The module can use encrypted TLS / SSL connections. The module can work as a WiFi (STA), IBSS or miniAP client (access point with the possibility of joining up to 5 clients). X-NUCLEO-IDW01M1 communicates with the STM32 Nucleo board via the UART interface and is controlled by AT commands. X-NUCLEO-IDW01M1 fits ST morpho and Arduino UNO R3 connectors.
properties
- The X-NUCLEO-IDW01M1 module includes the WiFi SPWF01SA module (FCC ID certificates: VRA-SG9011203, IC: 7420A-SG9011203, ETSI)
- Properties of the SPWF01SA module:
- Energy-saving WiFi module IEEE 802.11 b / g / n
- Built-in SMD antenna
- STM32 ARM Cortex-M3 microcontroller, 64 kB RAM, 512 kB Flash
- 1 MB Flash memory
- TCP / IP, TLS / SSL support
- WWW server
- REST API
- WEP / WPA / WPA2 security
- Operating modes: WiFi client, IBSS, miniAP (access point)
- 16 configurable GPIO lines
- Control of AT commands via UART
- Compatible with the STM32 Nucleo series
- Compatibility with ST morpho and Arduino UNO R3 connectors
- Free libraries and examples, compatibility with STM32Cube
- Compliance
To download
560892
Data sheet
- Wi-Fi standard
- 802.11 b/g/n
- Logic voltage
- 3,3 V
- Communication
- WiFi
- Wi-Fi chip
- Inny
- Frequency range
- 2,4 GHz
- Baud rate
- 54 Mbps
- Antenna connector
- Brak
- Power supply voltage
- 3,3 V
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506
zł361.48
Delivery date unknown
No product available!
Other products in the same category (16)
Bitscope Micro is a miniature measuring instrument with a USB interface, it can act as an 8-channel logic analyzer (40MS / s, 3.3V or 5V) or a 2-channel oscilloscope (bandwidth up to 20MHz). In addition, Bitscope can generate a clock signal as well as sinusoidal, triangular, rectangular and saws
Retired
No product available!
High performance WLAN USB module which enables the Raspberry Pi to connect to a Wi-Fi network
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 256kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, 64-LQFP
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, 64-LQFP
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-144
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 512kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-100
Retired
No product available!
32-bit microcontroller from the STM32F4 family with ARM Cortex-M4 core, 256kB Flash, 128KB SRAM, I2C, HDMI-CEC, Irda, LIN, SPI, UART / USART, USB, DMA, PWM, 1.7 ... 3.6V, LQFP-100
Retired
No product available!
Kit for building a minisumo robot on a crawler chassis. It has a bulldozer, control board and a set of caterpillars. Robot version for self-assembly, requires additional motors and four AA batteries. Pololu 3124
Retired
No product available!
Expansion module kit with Arduino compatible connectors for building a Zumo robot. The module includes a dual engine controller, buzzer and user button, as well as a 3-axis accelerometer and compass. Pololu 2508
Retired
No product available!
Bi-directional converter enabling communication of any device equipped with an RS232 serial port with 802.11 b / g / n wireless WiFi network. The module can work as a TCP client / TCP or UDP server. The layout is "transparent" for communicating systems, which does not doubt facilitate communication between them.
Retired
No product available!
USB A-microB USB cable with a length of 1m, white-blue cable, flat, green plugs illuminated with RGB diode
Retired
No product available!
1m USB A-microB USB cable, white-blue cable, flat pink RGB LED illuminated plugs
Retired
No product available!
The module is used to build prototypes and designs based on the popular ATmega8 microcontroller. It is possible to mount another microcontroller from the AVR family, if only pin outs coincide with ATmega8. MOD-01.Z
Retired
No product available!
No product available!
Module with a relay with a permissible maximum current of 10A with a 5V coil (MOD-03.Z). The module has a transistor relay control transistor and an overvoltage / self-inductive diode from the coil.
Retired
No product available!
The converter enables simple connection of the project being built with the UART output to the computer via a USB interface. After connecting to a computer, a virtual COM port is created. MOD-05 / AZ
Retired
No product available!
Shield for STM32 Nucleo with WiFi module b / g / n SPWF01SA. The module's firmware allows you to work as a client and UDP / TCP server, a web server, supports TCP / IP, TLS / SSL protocols. There are 16 GPIO lines available