![Ethernet Kit for Teensy 4.1 - Ethernet module for Teensy 4.1 (for assembly) Ethernet Kit for Teensy 4.1 - Ethernet module for Teensy 4.1 (for assembly)](https://kamami.pl/42503-large_default/ethernet-kit-for-teensy-41-ethernet-module-for-teensy-41-for-assembly.jpg)
![Ethernet Kit for Teensy 4.1 - Ethernet module for Teensy 4.1 (for assembly) Ethernet Kit for Teensy 4.1 - Ethernet module for Teensy 4.1 (for assembly)](https://kamami.pl/42503-large_default/ethernet-kit-for-teensy-41-ethernet-module-for-teensy-41-for-assembly.jpg)
zł22.37 tax excl.
Ethernet module designed for Teensy 4.1. The board has an Ethernet connector and a 6-pin connector for connecting to Teensy. PJRC ETHERNET-KIT
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
Ethernet module designed for Teensy 4.1. The board has an Ethernet connector and a 6-pin connector for connecting to Teensy. The set requires self-assembly. Full documentation, assembly instructions and NativeEthernet library are available on the product page.
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
8 MB PSRAM memory chip, designed for mounting on Teensy 4.1 boards. It enables the expansion of the memory of the microcontroller. PJRC IC-PSRAM-8MB-SOIC8
The adapter allows the Teensy 3.x family to be similar to the Feather family tiles. Thanks to this, it is possible to use a wide range of extensions for Feather tiles. Adafruit 3200
No product available!
Adapter with micro SD card slot. It is equipped with connectors compatible with Teensy LC, 3.0, 3.1, 3.2, 3.5 and 3.6 boards and WIZ820io or WIZ850io Ethernet modules. WIZ820-SD-ADAPTOR
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE
Development board with the NXP iMXRT1062 microcontroller based on the ARM Cortex-M7 core. It can be programmed using any environment and C language or using the Arduino IDE. PJRC TEENSY40_PINS
Teensy 4.1 is the fastest microcontroller with ARM Cortex-M7 600 MHz processor, 55 I/O pins, many communication interfaces, and additional functions such as cryptography and RTC, enabling USB programming. It is equipped with a microSD slot and an additional 8 MB PSRAM memory chip
No product available!
A small module, matching the breadboard, containing a 32-bit microcontroller with ARM Cortex M7 core. PJRC TEENSY40
No product available!
A small module matching the contact plate based on a 32-bit microcontroller with ARM Cortex M7 core. Has a microSD slot. PJRC TEENSY41
Small, white-on-black OLED 128x32 monochrome display designed for Teensy development board, controlled with the popular SSD1306 IC. SparkFun LCD-14048
No product available!
Adapter for WS2811 LED strips designed for Teensy 3.2, 3.5, 3.6 and 4.1. It uses the 74HCT245 chip and RJ45 connectors for communication with RGB LED strips. Teensy 3.2-4.1 PJRC OCTO28-ADAPTOR
No product available!
Module with 4 Qwiic connectors for Teensy boards. Communication via the I2C interface. SparkFun DEV-17119
Teensy Prop Shield is meant for making light and sound effects on small, handheld props and wearable costumes. This shield features a 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, and an 8MB flash memory. PJRC PROP-SHIELD-LC
8 MB PSRAM memory chip, designed for mounting on Teensy 4.1 boards. It enables the expansion of the memory of the microcontroller. PJRC IC-PSRAM-8MB-SOIC8
A small module based on a 32-bit microcontroller with an ARM Cortex M7 core. It has led out pads with microSD card interface and USB Host. Version with access to a secure software update. PJRC TEENSY40-LOCK
Audio module designed for Teensy 4.0 and 4.1. It uses the SGTL500 audio codec chip with I2S interface, it can work with a microSD card or SPI Flash memory. Audio Adapter Boards for Teensy 4.x (Rev D)
Development board with NXP iMXRT1062 ARM Cortex-M7 microcontroller. Equipped with a microSD slot. Version without Ethernet communication. PJRC TEENSY41-NE-PINS
The Teensy Prop Shield is meant for making interactive light and sound effects on small, handheld props and wearable costumes. Features 10DoF (Degrees of Freedom) motion sensors, 2W audio amp, high-speed 5V buffers for driving APA102 LEDs, 8MB flash memory. DEV-13995
No product available!
Ethernet module designed for Teensy 4.1. The board has an Ethernet connector and a 6-pin connector for connecting to Teensy. PJRC ETHERNET-KIT