WEP 853D5A - soldering station and soldering iron 75W
ID: 559950
5906623435487
zł808.29
Tax included
zł657.15 tax excl.
Soldering station with a soldering iron (100 ° C ... 480 ° C) and a soldering iron with a power of 75W (200 ° C ... 480 ° C). It has 4 LED displays, a 30V 5A service power supply, and a set of 4 nozzles
Description
WEP 853D5A soldering station has:
- Hot air, used for desoldering and soldering electronic circuits, eg BGA, SMD etc. The source of air is a fan
- A more powerful ground tip flask in yellow and blue with a power of 75W (the original Hakko heating element of Japanese production)
- 30V 5A service power supply with full voltage regulation. The LED display shows voltage and current
The station has built-in 4 LED displays informing about the set temperature of hot air and the mainsail, voltage and current. The station also has adjustable Hotair blow force.
The WEP 853D5A station is designed ESDSafe antistatic which protects the soldered parts from damage.
All modules of the station, ie the grinder, Hotair and the power supply can work independently of each other.
The station is additionally equipped with an automatic cooling system after finishing work. It effectively extends the life of the heating element.
Thanks to the high power of 75W and the heating speed, the soldering station is suitable for lead-free soldering in lead free soldering.
The station has a solid metal housing. Air exhaust is realized through a fan, thanks to which we are sure of a long-lasting, trouble-free operation with the stability of the blow-in force.
properties
- Solid and ergonomic housing
- Processor control high working stability, longer life of heating elements, energy saving
- Standby state
- It remembers the last set temperature
Hotair soldering iron
- Air flow: brushless fan
- Air flow: <120 L / min
- Temperature range: 100 ° C ... 480 ° C
- Temperature stability: +/- 1 ° C
- Display type: LED display
Soldering tip
- Temperature range: 200 ° C ... 480 ° C
- Temperature stability: +/- 1 ° C
- Earth voltage type: <2 mV
- Earth impedance
- Display type: LED display
- Heating element: ceramic
Service power supply
- Output voltage: 0 ~ 30 V
- Output current: 0 ~ 5 A adjustable
- Current measurement mode: mA / A
- Operating mode: Testowy / Zasilacz
- Temperature coefficient: <300 ppm / ° C
- DB ripple: <1 mvrms (virtual value)
- Regulation: coarse / fine
- Display type: LED display
What's included
- WEP 853D5A station
- Stand for the hotair flask
- A set of nozzles:
- circular nozzle with a diameter of 4.4 mm
- round nozzle with a diameter of 7 mm
- round nozzle with a diameter of 9 mm
- square nozzle type BGA 12x12 mm
- Stand for the tipped flask with a cleaning sponge
- Grinding flask with TI tip
- Cables for the power supply
559950
Data sheet
- Station type
- 3in1 (tip soldering iron, hotair, power supply)
- Tip soldering iron temperature
- 200 - 480 °C
- HotAir temperature
- 100 - 480 °C
- Power
- 75 W
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
No product available!
The most popular Sn60Pb40 SW26 solder is a high-quality lead product with SW26 flux, intended for professional soldering in electronics and electrical engineering, meeting the EN ISO 9453:2014 standard
zł4.31
24h
Available quantity: 283
Available
RF800 flux is a medium-active rosin solution that does not require washing. AG Termopasty ART.AGT-042
zł4.66
24h
Available quantity: 32
Available
Rosin for soldering with addition of activators, thanks to which this rosin has activity similar to solder paste. The packaging contains 40g of flux. AG Termopasty ART.AGT-034
zł3.95
24h
Available quantity: 81
Available
The universal stand protects against accidental thermal damage of various items during soldering. NAR0034
zł8.93
Delivery date unknown
No product available!
Other products in the same category (16)
The WEP 995D soldering station is a station consisting of a hot air soldering iron and a tip soldering iron (75 W). It has a PID controller, LCD display, adjustable temperature and air blow out provided by the fan located in the flask. It is used for soldering and desoldering electronic components such as: SOIC, CHIP, QFP, PLCC, BGA, SMD. WEP 995D
zł573.76
1 weeks
No product available!
Soldering iron with smooth regulation of digitally controlled air discharge, with temperature regulation in the range of 100 ° C to 500 ° C
zł214.89
24h
Available quantity: 1
Available
WEP 938 soldering station is a powerful soldering iron that quickly reaches the set temperature and quickly compensates for heat loss during operation. Thanks to this, you can solder at a lower temperature compared to cheaper soldering irons with slow temperature compensation. The station has the functions: temperature memory, sleep function, automatic shutdown. WEP 938
zł286.80
1 weeks
No product available!
Soldering station 5 in 1: hotair (100-480 deg. C), soldering tip 60W, service power supply 0-15V / 1A, RF signal tester and voltage meter. Included, among others set of nozzles and gripper for integrated circuits
zł509.58
24h
Available quantity: 1
Available
Soldering station 2 in 1: hotair 100..480 st. C, soldering iron 75W 200..480 st. C. The station has a built-in PID control, settings are displayed on the LCD display
zł742.90
1 weeks
No product available!
WEP 968DB + is a hot air soldering station and a tip soldering iron with a peak power of 70 W with fume extraction from under the tip. It is used for soldering of electronic components, shrinking, welding of plastics, heating. The station is equipped with a SAMSUNG microprocessor that checks the operating parameters of the station and corrects them to the set values. WEP 968DB+
zł507.05
1 weeks
No product available!
Soldering station WEP 937D + with smoothly adjustable temperature in the range from 200 to 480 ° C, temperature sensor and LED display.
zł178.58
24h
Available quantity: 1
Available
soldering iron WEP 992DA + is a hot air soldering station and a soldering iron. It is equipped with a PID microprocessor, used for soldering and desoldering electronic components, shrinking, welding plastics, heating. WEP 992DA + 3in1
zł1,159.73
24h
Available quantity: 2
Available
Soldering station HotAir + Flask Yihua 878D 700W 100-450 ° C (Repro)
zł198.39
1 weeks
No product available!
Soldering station with 50 W soldering iron. Controlled analogously by means of a potentiometer. YIHUA 936
zł74.10
24h
Available quantity: 1
Available
2 in 1 soldering station: hotair (100,500 in. C) and soldering iron (100.,500 in. C). Temperatures are displayed on LED displays
zł365.00
24h
Available quantity: 1
Available
Hotair soldering station 100..480 deg. C, soldering tip 75W 200..480 deg. C. Settings are displayed on LED displays
zł356.70
1 weeks
No product available!
Soldering station with soldering iron, LED lamp and magnifying glass. Station power 130 W. YIHUA 926
zł155.91
1 weeks
No product available!
Soldering station with a ceramic heating element with a capacity of 45W, temperature 200.40 ° C
zł112.00
24h
Available quantity: 1
Available
The WEP 952D+ soldering station is equipped with a 640 W hotair , 60 W tip, and a compressor. It combines simple operation and a very long life, it is perfectly suited to work in small services, homes, workshops.WEP 952D+
zł249.00
1 weeks
No product available!
2in1 soldering station with hot air soldering iron and soldering tip. 700 W power station. Equipped with an LCD display, controlled by potentiometers. YIHUA 872D
zł416.97
1 weeks
No product available!
Soldering station with a soldering iron (100 ° C ... 480 ° C) and a soldering iron with a power of 75W (200 ° C ... 480 ° C). It has 4 LED displays, a 30V 5A service power supply, and a set of 4 nozzles