Category: STARTER KITS, PROGRAMMERS, MODULES

Adapter dedicated to Teensy LC, Teensy 3.1 and Teensy 3.2 boards, which allows you to connect Arduino shields to them. SparkFun KIT-15716

Development board with ESP32-S3-WROOM-1-N16R8 module. It is equipped with the OV2640 camera, making it ideal for applications such as image recognition. It offers a large memory capacity (8 MB PSRAM and 16 MB Flash memory) and a rich set of communication interfaces. DFRobot DFR0975

Development board with ESP32 module (WiFi + Bluetooth). Equipped with a 40-pin connector compatible with Raspberry Pi HAT. Waveshare ESP32 One

Development kit from the M5Stack series equipped with the ESP32-S3 module. It will work well in projects related to IoT or in "wearable" devices. M5 Stack C124

Ultrasonic distance sensor with a measuring range from 2 to 400 cm. It communicates via a standard interface (Echo, Trigger) or the I2C bus. SparkFun SEN-17777

The expansion module is designed to work with Raspberry Pi 400 - a  portable computer built into the keyboard. The board has a 40-pin connector in the pin position and two Qwiic connectors. SparkFun DEV-17512

Rotary encoder module dedicated to M5StickC/C-CPlus. It integrates AB rotary encoder with push button function and is powered by built-in battery. M5stack U157

Adapter designed for micro:bit educational modules. It facilitates access to all pins, which are led out on the connector with a raster of 2.54 mm, which allows the use of a breadboard. SB Components 14880

Adapter with galvanic isolation for STLINK-V3SET. It also allows the programmer to work with systems powered with voltages below 3.3 V. STMicroelectronics B-STLINK-ISOL

Board for applications in the area of the Internet of Things (IoT). The module is based on the ESP-WROOM-32E system with 240 MHz clock, equipped with 4 MB Flash and 520 KB SRAM, as well as WiFi and Bluetooth communication. DFrobot DFR0654-F

Espressif ESP32-C3 WiFi module board. It offers 4 MB of Flash memory and 400 kB of SRAM, as well as an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5700

Set of "sleeping lion" with the educational module micro: bit. It consists of a main plate, noise: bit and felt elements, thread and needle to create the toy. Pimoroni PIM363

Module with 17x7 LED matrix display (119 LEDs) designed to work with micro:bit. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM353

Audio module with loudspeaker designed to work with micro:bit. There is an amplifier and an 8 Ω 2 W speaker on the board. Pimoroni PIM356

The module with six touch buttons and LED diodes is designed for micro:bit. It uses the CAP1166 driver and communicates via the I2C interface. Pimoroni PIM401

GPS module with SAM-M10Q GNSS receiver. The chip can receive data from all major positioning systems: GPS, GLONASS, Galileo, QZSS and BeiDou. It has derived UART and I2C interfaces. SparkFun GPS-21834

MicroMod main module with nRF52840 chip equipped with Bluetooth 5.1. The board uses an M.2 connector, so it can work with MicroMod expansion boards. SprakFun DEV-16984

A set with a radio transmitter and receiver operating at 315 MHz. The modules are equipped with Grove connectors and communicate via a digital interface. Seeed Studio 113020001

Module with LCD display 16x2 characters with black text and red backlight. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 104020112

Module with a button and red LED backlight. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 111020044