Category: STARTER KITS, PROGRAMMERS, MODULES

M5Stack series development kit equipped with ESP32 Pico. It will work in IoT-related projects or in "wearable" devices. M5Stack C008

3-port Hub with Grove connectors for M5Stack sets. It allows you to connect several devices with Grove connectors to the evaluation kit. M5Stack HUB Unit

Development board based on a microcontroller with a RISC-V core. It offers support for WiFi 6, Bluetooth 5 and Zigbee 3.0 and Thread (IEEE 802.15.4) protocols. Uses the ESP32-C6-WROOM-1 module and two USB Type C connectors. ESP32-C6-DEVKITC-1-N8

Grove vertical socket for surface mounting, 4-pin, pitch 2.0 mm. Set of 20 pieces. Seeed Studio 114020163

STM32 Nucleo-64 development board with STM32F303RET6 MCU, supports Arduino and ST morpho connectivity

Module with PIR S16-L221D motion sensor. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020617

DEV-13912

A set of 10 cables, 30 cm long, compliant with the Gravity standard. DFRobot FIT0513

Module with an 8-channel ADC converter with 8-bit resolution. It uses the ADS7830 chip and is equipped with a STEMMA QT connector, thanks to which it communicates via the I2C interface. Adafruit 5836

A module with an NFC PN532 transceiver, which supports proximity communication at the frequency of 13.56 MHz. The board is equipped with a Grove connector and communicates via the I2C or UART interface. Seeed Studio 113020006

Development board with WiFi and Bluetooth ESP32 module. It is equipped with an IPS 1.14" LCD display, a USB-UART converter and a Li-Ion battery charging system. ModESPttgo1.14"

Module with humidity and air temperature sensor based on the AM2302 system. It allows temperature measurement in the range from -40 to 80 ° C and the humidity measurement takes place in the range of 5 to 99% RH. The module has a connector in accordance with the Grove standard. Seeed Studio 101020019

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884

Silicone case for the UNIHIKER computer. Provides a comfortable grip and good protection, reducing the likelihood of accidental drops and screen damage. DFRobot FIT0936

Silicone case for the UNIHIKER computer. Provides a comfortable grip and good protection, reducing the likelihood of accidental drops and screen damage. DFRobot FIT0937

Audio module designed for Teensy 3.2, 3.5, 3.6 and 4.0. It uses the PT8211 16-bit digital to analog converter (DAC) chip. PJRC PT8211-AUDIO-KIT

Mini board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz and 264 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM558

Starter kit from the NUCLEO series equipped with the STM32H723ZG microcontroller (1 MB Flash, Cortex-M7), with a built-in programmer-debugger ST-Link/V3, equipped with connectors compatible with Arduino. STMicroelectronics NUCLEO-H723ZG

Module with 24-bit ADC NAU7802 converter. It enables reading data from strain gauges and scales. I2C interface. SparkFun SEN-15242

DEV-14044