A compact relay module with an Omron G5LE-14-DC5 relay, capable of controlling loads up to 10 A with a 5 V coil voltage. Thanks to a BSS138K MOSFET transistor, it can be activated by a 2.5 V to 20 V logic signal, facilitating interoperability with microcontrollers. The module is equipped with 5 mm screw terminals, a 3-pin JST SH connector, and LEDs to indicate operation. Pololu 5662

Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4874

Soil moisture sensor dedicated to micro:bit. It is supplied with the voltage from 3.3 V to 5 V and communicates via an analog signal. SparkFun SEN-15272

Step-Down converter with adjustable output voltage from 4.2 V to 15 V and output voltage up to 45 V. It is equipped with reverse voltage protection, input undervoltage lockout, overload and short circuit protection. Pololu 4854

DFRobot FIT1023 USB camera with an OV5648 sensor and autofocus provides high image quality and easy integration thanks to UVC compatibility. It supports MJPEG and YUY2, operates without drivers, and is used in vision systems, education, automation, and AI prototyping.

Set of 100 pieces of shielded RJ-45 category 5E network plugs from Lanberg, designed for LAN FTP cables with a hole diameter of 1.00 ± 0.07 mm, compatible with both wire and stranded, ideal for use with the NT-00204 crimper. Lanberg PLS-5000EZ

Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and RPi Compute Module. The camera is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 162°. Waveshare IMX219-160 IR-CUT Camera

Camera with IMX477 sensor with a resolution of 12.3 MPx designed for minicomputers Raspberry Pi. Equipped with focus controlled by the I2C interface. ArduCAM B0272

A single-channel IoT gateway operating in the 868 MHz band, designed for building and testing long-range LoRaWAN networks. Based on the ESP32 WROOM-32 microcontroller, the device offers WiFi and Ethernet connectivity and works with the RA-01H radio module, providing communication distances of up to approximately 1.5 km outdoors. The gateway supports the LoRaWAN 1.0.3 standard and is compatible with The Things Network platform, enabling easy cloud integration. It features a built-in color TFT display, USB-C power supply, and an acrylic enclosure.

The trigger module is designed for chargers PD 2.0 and PD 3.0. It is equipped with a USB type C input and an output on a 5.08 mm ARK screw connector. Allows you to power devices with 5 V, 9 V, 12 V, 15 V and 20 V and test chargers by replacing the PD device

A touchscreen display with an embedded ESP32-S3-WROOM-1-N4R8 module, combining high performance with application flexibility. The 5-inch TFT-LCD screen with a resolution of 800x480 px and capacitive touch ensures precise operation and a clear image. The device offers Wi-Fi and Bluetooth connectivity, supports LVGL, openHASP, and the popular Arduino IDE, PlatformIO, and MicroPython environments. Thanks to USB-C, TF, UART, and I2C connectors, it is ideal for IoT projects, automation, and intelligent control systems. Elecrow CrowPanel 5.0"-HMI

RC extension cable dedicated to servos, comes with JR/Futaba female and male connectors. It has twisted wires

Camera with a resolution of 2 MPx with a USB interface. Equipped with CMOS IMX291 sensor with 160° Fisheye lens and microphone. ArduCAM B0202

Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a 60° angle of view, autofocus and a 30 cm extension cable. ArduCAM B0321

Camera with a resolution of 2 MPx with a USB interface. Equipped with a CMOS IMX291 sensor with an ultra-wide lens with a viewing angle of 160°, a microphone and a case. ArduCAM UB020201

The 1.8m Ultra High Speed (2.1) HDMI cable with male HDMI-A 19-pin connectors provides a maximum resolution of up to 7680-4320 at 60 Hz, data transfer speeds up to 48 Gb/s, and supports features such as dynamic DR, eARC, ALLM, QFT, and 4:4:4 color sampling, with gold-plated connectors and rubber braid. Lanberg CA-HDMI-30CU-0018-BK

Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522

IPS LCD display module with a diagonal of 1.69" and a resolution of 240x280 pixels. It offers a rich palette of 262,000 colors and communication via the SPI interface. Perfect for creating small, portable devices such as smartwatches, digital photo frames or portable game consoles. Seeed Studio 104990802

The Micsig MS-A-007 Test Probes are a set of five precision needles designed to accurately test electronic components on PCBs and other delicate systems. Made of durable materials, the probes have thin, sharp tips that provide positive contact with the test points, minimizing the risk of damaging components.

Module with LCD TFT display with a diagonal of 1.8" and a resolution of 160x128 px. Communication via SPI interface. Waveshare Pico-LCD-1.8