Module with the driver of the resistive touch panel. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5423

External case designed to protect, transfer and store data on M.2 SSD drives with PCI-E (NVMe) interface. Equipped with a USB 3.1 interface with a C type connector. Orico M2PV-C3

Audio module with two microphones and display designed to work with the Raspberry Pi. Pimoroni PIM524

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM333

Extension module designed for home automation projects compatible with Raspberry Pi. The board is equipped with a 24 V 2 A relay, three buffer inputs, three sink outputs and three analog inputs with a working range up to 24 V. Pimoroni PIM487

Module with 3.5 mm TRS connector for MyoWare 2.0 muscle tension sensors. It allows you to conveniently connect the sensors with the development board via the Arduino shield. SparkFun DEV-18386

Cable dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun CAB-19244

This kit includes four 16MP IMX519 cameras and a baseboard for the Raspberry Pi and NVIDIA Jetson AGX Orin, Orin Nano, and Orin NX platforms. The cameras are equipped with a Sony IMX519 sensor with autofocus that works in manual, automatic, and continuous modes, offering complete control over image sharpness. With single, dual, and quad modes, the kit is ideal for robotics, surveillance, and advanced computer vision systems, ensuring synchronization and high image quality. ArduCAM B0388

Module with a GPS PA1010D receiver with a built-in ceramic antenna. It can download data from the most popular navigation systems: GPS, GLONASS, GALILEO. Pimoroni PIM525

The module is equipped with a LCD TFT display with a diagonal of 0.96" and a resolution of 160x80 px, controlled by the PIXXI-28 graphic controller. SparkFun LCD-19251

1 MPx camera module with OV9281 sensor that works with all versions of the Raspberry Pi. Equipped with a shutter and an IR filter, it is characterized by good sensitivity. Waveshare OV9281-120 Camera

Module with air quality sensor SGP30. It allows you to read the concentration of VOC (TVOC) and eCO2 and communicates via the I2C interface. Pimoroni PIM480

This breakout board, the ultimate companion for the VLSI VS1053B DSP codec chip, can decode a wide variety of audio formats MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM); it can be used to record audio in both PCM (WAV) and compressed Ogg Vorbis. 8 GPIO pins can be used for lighting up small LEDs or reading buttons. Adafruit 1381

The module with a black and white OLED display with a diagonal of 1.12" and a resolution of 128x128 pixels. It uses the SH1107 controller and communicates via the I2C interface. Pimoroni PIM374

Waterproof NeoPixel tape with RGB LED diodes, 1m long, 60 LEDs per meter, diodes are mounted on a flexible black PCB. Adafruit 1376

SparkFun Cab-12970

Adafruit 2324

Module with 5x5 RGB LED matrix display (25 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM435

LED strip with addressable RGB WS2813 diodes on a white PCB. It is powered by 5 V DC, has a length of 1 m and 60 LEDs/m. Protection level IP30

LED strip with COB diodes in white (warm). It is powered by 12 V DC, has a length of 5 m and 384 LEDs/m. Protection level IP20