Step-Down converter with input voltage up to 36 V which effectively reduces it to 3.3 V, while maintaining current up to 500 mA. Pololu 2842

Module with a pulse sensor (heart rate). The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 103020024

The USB-C to HDMI cable allows for a direct connection of a monitor to a USB-C port on a laptop or computer, eliminating the need for additional adapters. With a high-performance chipset, it supports resolutions up to 4K at 60Hz, ensuring high image quality and smooth performance. CA-CMHD-10CU-0010-BK

The USB-C to HDMI cable allows for a direct connection of a monitor to a USB-C port on a laptop or computer, eliminating the need for additional adapters. With a high-performance chipset, it supports resolutions up to 4K at 60Hz, ensuring high image quality and smooth performance. CA-CMHD-10CU-0018-BK

This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109

2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423

The USB-C to DVI-D cable allows for a direct connection of a monitor to a modern USB-C port, eliminating the need for additional adapters. With USB 3.1 Gen 2 bandwidth, it supports video transmission up to 4K at 30Hz, ensuring clear visuals and smooth performance. CA-CMDV-10CU-0018-BK.

Module with 1.27" OLED colour display with 128x96 resolution. It communicates via an SPI interface. Waveshare 1.27inch RGB OLED Module

The USB-C to DisplayPort cable allows for a direct connection of a monitor to a USB-C port, eliminating the need for additional adapters. With USB 3.2 Gen 2 bandwidth, it supports video transmission in up to 4K quality at 60Hz, ensuring clear visuals and smooth performance.  CA-CMDP-10CU-0010-BK

The USB Type-C 3.1 Gen 2 cable provides lightning-fast data transfer speeds of up to 10 Gb/s and supports 4K video at 60 Hz. With Quick Charge 4.0 and Power Delivery 3.0 support, it enables fast charging of devices with up to 100 W of power. Its durable construction and triple shielding ensure reliable performance in any conditions. CA-CMCM-32CU-0005-BK

Pre-installed XUbuntu 15.04 or latest version for ODROID-XU3, XU4 and HC1

FRAM memory with a capacity of 4kbit by Cypress Semiconductor, communicates via the I2C bus, the power supply voltage is in the range 2.7 - 3.6V. The system has an SOIC8 housing

A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 433 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-LF-B

Graphic display 320x240 pixels with Touch panel, 160x109mm, negative blue FSTN, SED133X controller - character generator

The Quectel EM060K-GL is an LTE-A Cat 6 module in M.2 form, designed for industrial and commercial applications, compatible with many other Quectel modules. It offers broad compatibility with major operators with an integrated GNSS receiver that supports GPS, GLONASS, BDS and Galileo. Its rich set of network protocols and support for a variety of drivers make it ideal for applications ranging from industrial routers to digital signaling systems. Waveshare 24386

32-bit microcontroller from the STM32F7 family with ARM Cortex-M7 core, 512kB Flash memory, 320kB SRAM, I2C, SPI, UART / USART memory, USB, CAN, 1.7 ... 3.6V, 144LQFP, STM, RoHS

The Displayport to HDMI cable is a great way to connect devices equipped with a Displayport interface to displays equipped with an HDMI port. With this, Displayport to HDMI adapters will no longer be needed. The cable allows you to support Full HD resolution, which will be perfect for office solutions. Lanberg CA-DPHD-11CC-0018-BK

The 25-meter RG6U CCS coaxial cable features a 1 mm copper-coated steel core and a shield composed of 48 aluminum wires and aluminum foil, providing effective protection against electromagnetic interference. With a 75 Ω impedance and an outer diameter of 6.8 mm, it is ideal for television and satellite installations.

This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. SEN-13332

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses 1.6mA@3.3V. SEN-13285