The board based on the L298 Dual Full-Bridge Motor Driver; can provide up to 4 Amps of current to the motors (2 Amps per motor). ROB-09571

A set of test leads 2x4 (4 signal and 4 GND) with a length of 23cm and 22AWG intended for logic analyzers Saleae.

RJ45 socket Cat 5 with shielding and LED indicator for THT mounting, designed for network devices requiring optical connection status signaling. The 90° angled design facilitates integration on PCBs in space-constrained layouts.

A four-port USB 2.0 hub that allows data transfer at speeds up to 12Mbit / s. It has a black housing and a 45cm long cable

The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board.

Gravity: IO Expansion & Motor Driver Shield is an Arduino compatible expansion board that provides digital I / O ports, analog I2C, SPI and UART interfaces, as well as a DC motor driver. DFRobot DFR0502

Module with a button and re LED backlight. Controlled by the I2C interface, it has a built-in debouncing mechanism, pull-up resistors as well as interrupts and a FIFO queue. SparkFun BOB-15932

MicroHDMI - HDMI cable in white color, 1 meter long. Intended for use with Raspberry Pi 4 model B and Raspberry Pi 5

DIP socket, 32-pin, precision, pitch 2,54mm, spacing 15,24mm, RoHS

Display 7 "1024x600 IPS compatible with LattePanda V1.0 mini computer. Display powered from LattePanda, no additional power supply needed DFRobot FIT0477

GPS module with GNSS L76X receiver. It can receive data from GPS, BDS and QZSS systems. It uses the UART interface and offers an accuracy of up to 2.5 m. Waveshare L76X GPS HAT

ARM Cortex-M4 CPU, 1024kB Flash, 256kB RAM, Ethernet, Encryption, Camera, LCD-TFT, USB OTG FS+HS, 2xCAN, 4xUART, 3xI2C, 6xSPI, ADC, DAC, STM, LQFP176, RoHS

The DFRobot Vibration Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration. DFR0052

LED backlight. Yellow. light 2.7 lm 12V 20mA 595nm, waterproof housing, easy self-adhesive assembly

Module with liquid turbidity sensor. The board is equipped with a Grove connector and communicates via a digital or analog interface. Seeed Studio 101020752