Module with 4-digit 7-segment LED display. The board is equipped with a TM1637 driver and communicates via a digital interface

Female terminal block, 12-pin. Pitch 3.81mm. Height 11.1mm. 15EDGK-3.81-12P

The inverter is powered by 12V DC, it generates alternating current to supply electroluminescent wires that glow under the influence of high voltage supply

Module with 25 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4425

The Step Down converter module converts the voltage in the range of 6-40V to 1.2-35V with an efficiency of 96% and can work with an intensity of up to 20A. Its compact dimensions and operating temperature range from -10°C to 75°C make it ideal for many electronic applications.

Flexible RGB LED matrix display with 64x64 resolution (4096 LEDs). It has a HUB75 interface and can work with Raspberry Pi, Arduino or ESP32. Waveshare RGB-Matrix-P3-64x64-F

A module with a high precision temperature sensor based on the MCP9808 chip. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 5027

Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681

Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A

Two-channel driver for DC motors with an operating voltage from 7 to 45 V and a continuous current of up to 60 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS60

The expansion module (shield) is designed for Teensy 4.0 and Teensy 4.1 boards. It allows you to easily connect displays from the SmartMatrix series. Adafruit 4828

Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage

Module with ATSAMD51J19 microcontroller and ESP32 WiFi system dedicated to matrix displays with HUB75 interface. Adafruit 4745

Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage

Easy-to-install indicator signaling the operation of devices or systems, with an attached resistor and adapted to work with 12V supply voltage

The USB-UART converter module with a USB-C connector is a versatile component that uses the CH340N chip to enable communication between the computer and devices using the UART interface, supporting 3.3V and 5V logical voltages, which makes it a universal tool for various applications. HW-234

A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with soldered connectors. Pololu 5064

An adapter dedicated to the FLIR Lepton thermal imaging camera. It has been preconfigured to operate as a USB plug-and-play UVC 1.0 camera, and can also communicate via UART and I2C interfaces. SparkFun DEV-20812

Functional module for MicroMod boards. It allows you to add cellular communication to your project using the Notecard - NOTE-NBGL-500 from Blues Wireless. SparkFun WRL-20409

Kit with Facet L-Band GNSS RTK receiver and accessories. Get centimeter-level global positioning measurements with GNSS RTK. SparkFun GPS-20000