STEMMA QT BH1750 Light Sensor - module with a light sensor
ID: 587248
5906623430246
zł23.28
Tax included
zł18.93 tax excl.
Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681
Description
Module with a light intensity sensor BH1750. It has a built-in 16-bit ADC converter, thanks to which the user receives a digital signal and measurement expressed in lux. It is a good replacement for photoresistors, offering greater accuracy and easier implementation in the application with a wide measuring range from 1 to 65535 lux. It can work with systems with a working voltage of 3.3 V or 5 V, and communication is via the I2C interface (STEMMA QT connector). Full documentation with examples is available on the product page.
Features
- Wide range (1 to 65535 lux) and high measurement resolution (16 bits)
- Interface; I2C
- A spectral response similar to that of the human eye
- Low power consumption mode
- Noise filtering function (50Hz / 60Hz)
- A small variation in measurements
- Insignificant influence of infrared lighting on the measurement results
- Voltage: 3.3V or 5V
- STEMMA QT connector
- Dimensions: 25.3 x 17.7 x 4.5 mm
Kit contains
- STEMMA QT BH1750 Light Sensor module
- 8-pin straight male goldpin connector
587248
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Flexible Qwiic cable 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single male goldpin connectors. SparkFun PRT-17912
zł11.89
24h
Available quantity: 10
Available
Flexible Qwiic cable, 150 mm long. On one side it is terminated with a female Qwiic connector, and on the other side with single female goldpin connectors. SparkFun PRT-17261
zł11.94
24h
Available quantity: 1
Available
Flexible 4-core cable, 50 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17260
zł9.21
24h
Available quantity: 26
Available
Flexible 4-core cable, 200 mm long, terminated on both sides with a Qwiic plug. Sparkfun PRT-17258
zł12.90
24h
Available quantity: 10
Available
Module with a 10-channel AS7341 sensor that detects light in various wavelength ranges (color detection). It communicates via the I2C interface. Adafruit 4698
zł94.62
24h
Available quantity: 3
Available
Other products in the same category (16)
TCS34725 RGB Color Sensor is a color sensor TCS34725 controlled by the I2C interface. It is powered by voltage in the range of 3.3 ... 5V and is intended for Arduino-compatible boards. DFRobot SEN0212
zł36.30
24h
Available quantity: 1
Available
Module with ultraviolet (UV) sensor based on the GUVA-S12D system. It allows measurement of radiation with a wavelength in the range from 240 to 370 nm. The module has a connector in accordance with the Grove standard. Seeed Studio 101020043
zł51.94
24h
Available quantity: 1
Available
Module with a flame sensor or other light sources with a wavelength in the range of 760 to 1100 nm. It was based on the YG1006 sensor (photovolver NPN). The sensor has a connector compatible with the Grove standard. Seeed studio 101020049
zł38.14
24h
Available quantity: 2
Available
Module with digital light sensor TSL2561. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020030
zł30.71
24h
Available quantity: 1
Available
UV Sensor with response spectrum: 200nm-370nm
zł36.97
24h
Available quantity: 1
Available
Gravity: I2C VEML7700 Ambient Light. Sensor SKU. SEN0228
zł45.07
4 weeks
No product available!
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Adafruit 3595
zł39.10
24h
Available quantity: 2
Available
No product available!
No product available!
DFRobot Gravity analog light intensity module for Arduino and Raspberry Pi. DFRobot DFR0026
zł11.01
24h
Available quantity: 5
Available
Sensor for detecting the distance, intensity and frequency of light (lightning) within a radius of 40 km. The module enables weather enthusiasts to measure data about local storms. DFRobot SEN0290
zł145.79
24h
Available quantity: 3
Available
A 5-channel flame detector module for detecting a flame over a larger area. Detects fire with 5 sensors that are placed on the module every 30 degrees. It has a digital and analog output. modFLAME-5CH
zł34.10
24h
Available quantity: 2
Available
This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489
zł72.96
24h
Available quantity: 1
Available
Module with three optical inspection sensors (spectrophotometers) from the AS7265x series. The module consists of three sensors; AS72651, AS72652 and AS72653 which can detect wavelengths from 410nm (UV) to 940nm (IR). SparkFun SEN-15050
zł379.00
3 weeks
No product available!
he flame detector module detects the source emitting a wavelength between 760 and 1100 nm. It allows to detect, among others source of fire. Analog interface. DFRobot DFR0076
zł18.09
4 weeks
No product available!
Heart rate monitor module based on the popular MAX30101 chip. The board is equipped with connectors compliant with the Qwiic standard. SparkFun SEN-16474
zł186.38
24h
Available quantity: 1
Available
Module with a light intensity sensor BH1750. The measuring range is from 1 to 65535 lux, and communication is carried out using the I2C bus. Adafruit 4681