Module with an IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels dedicated to Raspberry Pi Pico boards. It uses the DVI interface for communication. Waveshare PICO-DVI-7inch

Module with relay up to 5.5 A and 240 V AC controlled by the I2C interface. SparkFun COM-15093

Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. Communicates via USB interface. Waveshare Thermal USB Camera

Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633

Module with monostable relay. It allows you to control high-power elements with a microcontroller. Adafruit 3191

Module with gas sensor designed to monitor indoor air quality. It was based on the AMS CCS811 system that allows the detection of volatile organic compounds (VOCs) in the air. Digilent 410-386

Kit with 4.2" e-Paper display with passive power supply via NFC, NFC module and microSD card. Waveshare 4.2inch NFC e-Paper Eval Kit

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-1000-S

The module with the MCP9600 amplifier is designed to work with a thermocouple. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 101020594

Shielded FTP category 6 Ethernet network cable with RJ45 plugs. Lanberg PCF6-10CC-1000-G

QTR-3A Reflectance Sensor Array

Module with PM2.5 HM3301 dust sensor. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020613

Module with a 4-color e-Paper display with a diagonal of 2.36" and a resolution of 296x168 px. It communicates via the SPI interface. Waveshare 2.36inch e-Paper Module (G)

Tangle-free USB-A / microUSB-B cable with a length of 1m, in a set with an adapter for Apple iPhone devices, iPad (8-pin Apple Lightning connector). Flat cable, in flexible, silicone insulation, light blue color

Module with 13 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4113

Module with TB6612FNG DC motors dual driver. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 108020103

These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x\'s). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to the Internet or your mobile device. Adafruit 3232

The UART-USB converter built on the FTDI FT232RL chip. Compatible with 3.3V and 5V voltages. DFRobot DFR0065