Module with a TL281 4-channel optocoupler with a maximum collector-emitter voltage of 80 V

9x16 Charlieplexed LEDs designed to match with the Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731. Color: BLUE. Adafruit 2973

5.79-inch black and white e-Paper module with a resolution of 792x272 px. With a wide viewing angle, this display works well in a variety of lighting conditions, providing readability comparable to traditional paper. Waveshare 5.79inch e-Paper Module

Set of 25 momentary microswitches with white, green, red, yellow and blue caps

El-wire is a thin and flexible wire which shines under high voltage. The cable is red, has a diameter of 3mm and a length of 5 meters

3D stereo camera module, which was built of two cameras with OV2311 sensor. Designed to work with Raspberry Pi, Jetson Nano and Xavier NX. ArduCAM B0264

A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Raspberry Pi, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265R

A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267

HDMI type A(F) to HDMI type A(F) adapter with gold-plated contacts, supports video transmission up to 3840 × 2160 px (4K), ARC and Dynamic HDR standards. Lanberg AD‑0018‑BK

690-Point Breadboard, 175x46x10mm

630-Point Breadboard, 165x37x10mm

UART debugger module designed specifically for Raspberry Pi 5. Allows easy connection to UART debug connector via SH1.0 3PIN cable, ensuring convenient and effective debugging. Waveshare Pi UART Debugger

Module with an e-Paper display with a diagonal of 4.26" and a resolution of 800x480 pixels. Thanks to communication via the SPI interface, it allows easy integration with various systems of microcontrollers and single-board computers, including Raspberry Pi. Waveshare 4.26inch e-Paper HAT

A set with two OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0266

270-Point Breadboard, 82x46x10mm

8-channel module with voltage analog inputs ranging from 0 to 10 V. After reconfiguration, it enables measurement of voltage in the range from 2 to 10 V or current in the range from 0 to 20 mA or 4 to 20 mA. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in a housing that can be mounted on an industrial rail. Waveshare Modbus RTU Analog Input 8CH (B)

Camera module with a two-degree-of-freedom (2 DoF) platform. It uses the OV5647 sensor with a resolution of 5 MP and provides a 360° camera rotation angle thanks to the built-in servo. It is dedicated to the Raspberry Pi 4B and Raspberry Pi 5 minicomputers. 2-Axis Pan-Tilt Camera Module (EU)

32-bit ARM Cortex-M3 microcontroller; 32 kB flash, 8 kB SRAM; LQFP48

6DoF module with MPU6050 (3-axis accelerometer, 3-axis gyroscope) powered with 3-5V. I2C communication interface