Module with a stepper motor driver based on the DRV8434 system. It allows you to power a bipolar motor with a current of up to 1.2 A per phase and a voltage from 4.5 V to 48 V. Pololu 3762

RGB LED matrix display with a resolution of 64x32 (2048 LEDs). It has a HUB75 interface and can work with Raspberry Pi, Arduino or ESP32. Waveshare RGB-Matrix-P5-64x32

Matrix display module with a Raspberry Pi Pico W control board. It has built-in 256 RGB LEDs in a 16 x 16 arrangement, an amplifier with a speaker and buttons. Perfect for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM676

COM-11274 Button, 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch

Programmable coin acceptor with memory for 3 types of coins. It uses the thickness, diameter and fall time of the coins for identification. Programming is done using buttons and a 7-segment display on the side of the device. SparkFun COM-11719

Programmable coin acceptor with memory for 6 types of coins. It uses the thickness, diameter and fall time of the coins for identification. Programming is done using buttons and a 7-segment display on the side of the device. SparkFun COM-11636

32-bit microcontroller with ARM Cortex-M0 core, XMC1300, 64kB Flash, TSSOP-38, Infineon

DC motor driver with an operating voltage from 6 to 60 V and a maximum continuous current of 300 A. It can communicate via USB, UART, RC or analog signal and allows for the implementation of a feedback loop. Pololu 3584

The 15.6" IPS LCD display with capacitive touch panel is a 1920×1080 resolution screen that supports USB Type-C or HDMI input signals. It is compatible with single-board computers such as LattePanda Sigma, LattePanda Alpha, LattePanda Delta, Raspberry PI 4B and Jetson Nano, as well as various types of desktop computers, laptops, mini computers, industrial computers and tablets. DFRobot DFR1045

Digital isolator for RS-485/RS-422 interfaces. Analog Devices ADM2587EBRWZ

5" TFT LCD display with touch panel. It is equipped with a parallel interface to display the image. It has a resolution of 800x480 pixels. SeeedStudio 104990262

STM32G041J6M6, Arm Cortex-M0+ MCU with 32 Kbytes of Flash memory, 8 Kbytes RAM, 64 MHz CPU, 2x USART, timers, ADC, comm. I/F, AES256, SO8N

Module with a mechanical encoder and RGB backlight in the form of 24 colorful LEDs. It offers five buttons and a rotary encoder. For communication, it uses a Qwiic/Stemma QT connector or a connector compatible with the Breakout Garden system. It is perfect, for example, for controlling lighting. Pimoroni PIM673

RC extension cable dedicated to servos, comes with JR/Futaba female and male connectors. It has twisted wires

Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels. It is equipped with a 40-pin GPIO connector and can work with Raspberry Pi minicomputers. It communicates via the SPI interface. Pimoroni PIM667

Transparent prototype contact board with 400 points, dimensions 82x55x10 mm, with double-sided adhesive tape. PPS0400T

32-bit microcontroller from the STM32G0 family with ARM Cortex-M0+ core, 64kB Flash memory, 8kB RAM, clocking up to 64MHz and interfaces I2C, SPI, UART/USART, I2S, DMA, PWM, Temp Sensor, WDT, A/D 10x12b in the TSSOP20 package. STMicroelectronics STM32G031F8P6

IPS LCD display with a touch panel with a screen diagonal of 11.9". It offers a resolution of 320 x 1480 pixels and an HDMI input, which allows you to easily connect the display to various signal sources. Waveshare 11.9inch Touch Monitor

Lens with M12 mount and IR filter. It has a focal length of 6 mm and a FoV 67°/53°/41°. ArduCAM LN003