M12 mount lens included with adapter. 25 mm focal length and 20° FoV. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN036

Module with a matrix LED RGB 7x17 display (119 LEDs) designed to work with the Raspberry Pi. It uses two LED drivers and communicates via the SPI interface. Pimoroni PIM498

Large momentary button with a diameter of 100 mm with LED backlight. It was based on a limit switch. The housing is black

The Lanberg USB cable enables seamless communication between USB-C devices and computers via a USB-A port. Additionally, it supports Quick Charge 3.0 fast charging standard, ensuring efficient and reliable performance. CA-USBO-15CU-0018-BK

Crowtail-MOSFET 2.0 enables controlling devices powered with up to 50 V DC using a low-voltage signal from a microcontroller. It is used in projects requiring power isolation or switching, such as fans, LED strips or DC motors.

Step-Up DC-DC converter module. It has an input voltage of 1.3 to 16 V, an output voltage of 3.3 V and a maximum input of up to 2 A. Pololu 4940

A set with a measuring module and a probe for measuring the pH of the solution. It is supplied with the voltage of 3.3 to 5.5 V. It has an analog Gravity output interface. DFRobot SEN0161-V2

Finder 99.01.0.024.59 is an LED module with a green diode, designed to work with sockets from series 90, 92, 94, 95, 96, and 97, providing visual indication of the relay status. This module is compatible with supply voltages from 6 to 24 V AC/DC, making it a versatile solution for various industrial applications.

FLUX LED 7.62 x 7.62 [mm] 5mm ultra red, angle 90 degrees; light 1200 mcd (20mA) (2.0V) df630 nm, anode at the corner marked

Mini keyboard with three keys (default "Ctrl", "C" and "V") with the possibility of reprogramming the functions performed. It uses the RP2040 microcontroller from Raspberry Pi and offers RGB backlighting. Connects to your computer via a USB Type-C port. Waveshare RP2040-Keyboard-3

DFRobot SEN0629 environmental module with a BME688 sensor enables precise measurement of temperature, humidity, pressure, and VOC, and supports AI-assisted gas analysis. Compatibility with I2C/SPI and broad functionality make it suitable for use in smart building systems, environmental monitoring, and industry.

Male terminal block, angled, 9-pin. Pitch 3.5mm. Height 9.2mm. KF2EDGR. Set of 5 pcs

Module with Flash memory W25Q16 with a capacity of 16 Mbit (2 MB). It communicates via the SPI interface. Adafruit 5635

Adapter for MQ gas sensor with potentiometer for analog signal calibration. MOD 72

Step-Down DC-DC converter module based on the D36V6F5 chip. Input voltage 5.2..50V, output voltage 5V (max. 600mA). Pololu 3792

DC-DC Step-Up converter U3V40F12 with an output voltage of 12 V, an input voltage of 1.3 to 12 V and a maximum output current of 4 A. Pololu 4016

Kitronik 2726 is a lilac LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.