4G/3G/2G communication and GNSS positioning module. It allows you to make phone calls, support SMS, MMS, e-mail, TCP, UDP, DTMF, HTTP, FTP and has support for GPS, BeiDou, Glonass, LBS. Waveshare SIM7600G-H 4G for Jetson Nano

Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera

Module with proximity and ambient light sensor based on the VCNL4020 system. It allows you to detect obstacles in the range from 0 to 20 cm and measure light intensity from 0.26 to 16,000 lux. It communicates via the I2C bus. Adafruit 5810

Adafruit 2479 - Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)

GNSS antenna enabling dual-band reception (L1/L5) for the GPS, GLONASS, Galileo, IRNSS and BeiDou constellations. Uses an SMA connector. Waveshare GPS External Antenna (D)

Module with encoder and RGB backlight. It has an unlimited range of motion and is perfect for e.g. lighting control. Pimoroni PIM522

Tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor. Operating voltage range from 0 V to 11 V, built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature. Pololu 2990

USB A-microB USB cable with a length of 1m, white-blue cable, flat, blue plugs illuminated with RGB diode

The ESP-12F, ESP-07S and ESP-12S module programming stand is a versatile tool, ideal for testing and programming these modules. It offers full control over IO ports, allows software downloads, and includes useful indicators for combustion mode and serial communication.

Module with a 2-channel inductive sensor LDC1612. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020599

Module with a 3-color e-Paper display with a diagonal of 2.66" and a resolution of 296x152 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.66-B

Module with a distance sensor with a range of up to 130 cm. It has a digital output that generates a pulse with a width proportional to the measured length. Pololu 4071

5" AMOLED display with touch screen. Equipped with HDMI interface for image display and USB for touch screen. Resolution 960x544 pixels. Waveshare 5inch HDMI AMOLED

Set of 100 pieces of shielded RJ-45 category 5E network plugs from Lanberg, designed for LAN FTP cables with a hole diameter of 1.00 ± 0.07 mm, compatible with both wire and stranded, ideal for use with the NT-00204 crimper. Lanberg PLS-5000EZ

DC-DC Step-Down converter module. It has an input voltage from 12 to 45 V, an output voltage of 12 V and a maximum output current of up to 2.8 A. Pololu 4896

Module with 16-bit AD5693R DAC converter with built-in EEPROM memory. Equipped with a STEMMA QT connector, it communicates using the I2C bus. Adafruit 5811

Module with 8x8 RGB LED matrix, MY9221 LED drivers and STM32F031 microcontroller. The board is equipped with a Grove connector and communicates via I2C. Seeed Studio 105020073

DC-DC Step-Down converter module. It has an input voltage from 15 to 45 V, an output voltage of 15 V and a maximum output current of up to 2.7 A. Pololu 4897

Gravity module designed based on the GP8501 system. It is a two-channel DAC (analog-to-digital) converter with PWM communication that offers an output signal with 8-bit resolution and 0.5% accuracy. It allows you to generate analog signals with a voltage range from 0 to 2.5 V or from 0 to VCC. DFRobot DFR1037