Compact ORP monitoring system used as an indicator of water quality detection. DFRobot SEN0464

UART-RS485 converter module based on the TD (H) 541S485H chip. Equipped with power isolation and TVS. DFRobot DFR0845

Module with PM2.5 dust sensor. The board is equipped with a Gravity connector and communicates via the I2C interface. DFRobot SEN0460

6.25" DSI capacitive display Waveshare 28918 with an IPS matrix and a touch panel using optical bonding technology offers a high resolution of 720×1560 pixels and wide viewing angles. Designed to work with Raspberry Pi, it enables multi-touch support and brightness adjustment via software. The reinforced surface made of tempered glass provides resistance to mechanical damage. It is suitable for user interface projects, control panels, and portable embedded devices.

Color sensor with a range from 8 to 16 mm. It offers 3 operating modes and can be powered with the voltage from 12 to 24 V. DFRobot SEN0506

This module features a fixed-gain, 38 kHz modulated IR sensor and a corresponding IR LED with oscillator circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).

5" HDMI display with 720×1280 resolution, IPS panel, 5-point touch, and optical bonding technology provides high image quality and mechanical durability. Thanks to broad compatibility and compact dimensions, it is suitable for user interfaces, control devices, and embedded systems.

Camera with a resolution of 2 MPx with a USB interface. Equipped with CMOS AR0230 sensor with 100° lens. ArduCAM B0203

Camera with a resolution of 8 MPx with a USB interface. Equipped with CMOS IMX179 sensor with 75° lens, microphone, housing and tripod. ArduCAM UB019701

A set of angular connectors XT30PW (male plug and female socket) with a maximum current of 30 A. It has mounting holes, it will work as a battery connector or a power connector in RC models. Amass XT30PW

Camera with OV4689 CMOS sensor with a resolution of 2688x1520 px. It communicates via a parallel interface. ArduCAM U6035

A set with a radio transmitter and receiver operating at 433 MHz. The modules are equipped with Gravity connectors and communicate via a digital interface. DFRobot TEL0140-1

Module with an analog gas sensor. It allows you to measure the concentration of NO, NO2 and H2. DFRobot SEN0441

Miniature camera module with OV5647 5MP sensor dedicated to Raspberry Pi Zero and Compute Module. Equipped with a lens with a viewing angle of 160°. ArduCAM B006605

A set of four M12 lenses is an ideal choice to be used with oCam series cameras. Lens set without IR cut filter

Camera module 8 MPx with IMX219 sensor and lens with a viewing angle of 77°. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0190

Module with a color LCD IPS display with a screen diagonal of 4" and a resolution of 720x720 px, dedicated to the Raspberry Pi. Equipped with a capacitive touch screen, communicates via the DSI interface. Pimoroni PIM470

Universal module supervised by the website, which can control both DC circuits as well as powered from 230 V mains. The states of digital inputs, relays and control buttons are presented on the website. AVTMOD05

Kit with 2.9" e-Paper display with passive power supply via NFC, NFC module and microSD card. Waveshare 2.9inch NFC e-Paper Eval Kit

Low current 1.2 to 37V adjustable voltage regulator, TO-92, STM, RoHS