Camera with USB interface equipped with CMOS AR0230 1/2.7” sensor with a resolution of 2 MPx. It has an integrated IR filter and a lens with a 100° field of view. The camera can take photos with a resolution of 1928H x 1080V and record videos in 25fps @ 1920x1080. It supports WDR (Wide Dynamic Range) technology and is powered from the USB port. The module works with native drivers (compatible with UVC) built into Windows, Linux, Mac and Android, making the installation of the camera easy and intuitive. It will be used for monitoring 3D printing and as a spy camera.
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Camera with a resolution of 3 MPx with a USB interface. Equipped with CMOS AR0331 sensor with a lens with a viewing angle of 70° and two microphones. ArduCAM UB0237
No product available!
Camera with a resolution of 2 MPx with a USB interface. Equipped with a CMOS IMX291 sensor with an ultra-wide lens with a viewing angle of 160°, a microphone and a case. ArduCAM UB020201
Camera with a resolution of 2 MPx with a USB interface. Equipped with a CMOS IMX291 sensor with an ultra-wide lens with a viewing angle of 120°, a microphone and a case. ArduCAM UB020101
No product available!
A 20 cm long 6-pin cable with a JST XH2.5 female plug on one side
Official camera module set to work with Raspberry Pi minicomputers. Equipped with a Sony IMX708 sensor with a resolution of 12 Mpx and a lens with a viewing angle of 120 ° with autofocus. Raspberry Pi SC0874
No product available!
The LSM6DS33 combines a digital 3-axis accelerometer and 3-axis gyroscope into a single package. The sensor provides six independent acceleration and rotation rate readings whose sensitivities can be set in the ranges of ±2 g to ±16 g and ±125°/s to ±2000°/s, available through I²C and SPI interfaces.
OLED display with a diagonal of 2.4" and a resolution of 128x64 pixels. Displays the content in yellow. Uses the SSD1309 driver and communicates via the SPI or I2C bus. Waveshare 2.42inch OLED Module (C)
The module with the HC-05 compatible transceiver makes it easy to add Bluetooth communication to an existing project. The system is controlled by exchanging AT commands (UART bus)
Low Noise, 90 MHz, Variable Gain Amplifier, SOIC8, Analog Devices, RoHS
Module with 11 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4311
The multi-mode (SM) fiber optic patchcord with LC connector in a duplex configuration is a high-quality cable designed for fast and reliable data transmission in fiber optic networks. Made with OM3 fiber and featuring an LSZH jacket, it ensures low attenuation and high bending resistance, making it ideal for telecommunications, data centers, and other professional network installations. FO-LULU-MD31-0100-TQ
A module with an electret microphone and an amplifier that will allow you to detect a voice, a clap or a door slam using the analog output
No product available!
RGB LED matrix module with 64 APA102-2020 diodes in 8x8 arrangement. It is powered by 5V by the pads located on the bottom of the board and controlled by the SPI interface. SparkFun COM-15047
The Lanberg Premium audio cable, 3 meters in length, with 3.5 mm minijack connectors, ensures high-quality sound transmission between audio devices. With its textile braid, aluminum connectors, and gold-plated plugs, it offers durability and reliability. CA-MJMJ-10CU-0020-BL
Fingerprint reader module (capacitive sensor). It uses a high-performance processor and the IDfinger6.0 algorithm. It provides fast identification and stable operation and communicates via the UART interface. DFRobot SEN0542
Pololu 5V Step-Up/Step-Down Voltage Regulator S7V7F5
No product available!
Black and white OLED display with a resolution of 128x32 pixels. Powered with the voltage from 3.3 V to 5V, it communicates via the I2C interface. Waveshare 0.91inch OLED Module
32-bit microcontroller from the STM32C0 family with ARM Cortex-M0+ core, 16kB Flash memory, 6kB RAM memory, 48MHz, 2 x USART, timers, ADC, comm. I/Fs, 2-3.6V SON-8
No product available!
Camera with a resolution of 2 MPx with a USB interface. Equipped with CMOS AR0230 sensor with 100° lens. ArduCAM B0203