Module with white LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030009

Module with air quality sensor SGP30. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020512

Finder 7S.23.9.024.0210 is a modular safety relay with mechanically linked contacts, compliant with the PN-EN 61810-3 and EN 13849-1 standards. Thanks to its compact design with a width of 17.5 mm, LED indicator, and compatibility with DIN 35 mm rail mounting, the relay is used in machine control systems, industrial automation, and safety installations where high operational safety and reliability are required.

ToF VL53L0X distance sensor module with a range of 3 to 200 cm. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020532

Module with OTP-538U non-contact temperature sensor. The board is equipped with a Grove connector and has analog outputs. Seeed Studio 101020062

HSTS08L 10A 2.5V Current Sensor. Enables measurement of high currents. modHSTS08L

Module with 4 relays SRD-05VDC-SL-C with a load up to 10 A. The board was equipped with a Grove connector and communicates via I2C. Seeed Studio 103020133

A set of unshielded RJ-45 Cat. 5e network plugs. They feature triple-pronged design, allowing them to be used with both solid and stranded cables. Lanberg PLU-5000EZ

1-Bit Dual-Supply Non-Inverting Level Translator, SOT353, ON Semiconductor, RoHS

Finder 26.02.8.230.0000 is a pulse (bistable) relay equipped with two normally open (DPST-NO) contacts, with a 10 A load capacity and a maximum switching voltage of 400 V AC. Powered by a 230 V AC coil voltage, it is designed for mounting in an installation box, facilitating integration into building automation systems.

Module with a BME680 sensor that allows you to measure temperature, humidity, pressure and gas detection. The board is equipped with a Grove connector and communicates via I2C and SPI. Seeed Studio 101020513

The ArduCAM camera module, equipped with the Omnivision OV5647 sensor, allows you to record images in 5 MP resolution and videos in 1080p, 720p and 480p quality at various frame rates. With support for Raspberry Pi minicomputers and a wide range of applications, it is ideal for 3D printing monitoring, IoT systems, robotics and other projects requiring high image quality. ArduCAM B0176R

ESP32-S3-based module designed to read data from USB HID devices and forward it to a microcontroller via I2C, UART or SPI. It enables a USB keyboard, mouse or MIDI controller to be connected without implementing a USB Host stack on the Arduino or ESP32 side. The USB-A port is powered by an onboard boost converter that raises the voltage from 3.3 V to 5 V, while the current available to the connected device is limited to 260 mA. Soldered 333390

A miniature 16MP camera with a Sony IMX519 sensor, designed for projects requiring compact solutions. With autofocus and 16MP resolution, it offers high image quality, ideal for surveillance, robotics, and image recognition systems. Compatible with Raspberry Pi and Jetson platforms, it supports Full HD recording and connects via the MIPI CSI interface, ensuring easy integration with embedded systems. ArduCAM B0389

IMU module based on the Bosch BHI385, integrating a 3-axis accelerometer, 3-axis gyroscope and a 32-bit ARC EM4 processor for sensor data processing. Bosch BSX sensor fusion provides outputs including 3D orientation, step counting, tap detection and wrist gesture recognition without requiring these calculations to be performed by the host microcontroller. Soldered 333375

The 8MP NoIR camera is designed for low-light conditions and complete darkness. Utilizing a Sony IMX219 sensor without an IR filter, it captures images in infrared light, ideal for nighttime surveillance or wildlife observation. Compatible with the Raspberry Pi and equipped with a CSI connector, it provides high image quality and full support for standard resolutions and video modes. ArduCAM B0395

This 11.9MP Sony IMX708 sensor module offers HD recording and advanced PDAF and CDAF autofocus systems. Equipped with a 102° wide-angle lens and an IR-cut filter, it\'s ideal for surveillance, AI projects, and nature photography. The camera is fully compatible with the Raspberry Pi, supported by libcamera and Picamera2, and the included enclosure makes it easy to integrate into DIY projects. ArduCAM B0307

LCD 4x16, 87x60mm, LED backlight (white), FFSTN, enhanced temperature range, Pb-free