The Yato YT-068911 electrical connector set includes 250 elements designed for creating durable connections in electrical installations. A variety of connector types ensures wide applicability in automotive, service, and general electrical work. Yato YT-068911

M5Stack U107 is an evaluation board with an RF transceiver operating in the 840 MHz - 960 MHz band, designed for wireless communication in IoT systems. Thanks to its wide frequency range, this module is suitable for applications such as smart cities, remote measurements and security systems

A high-power power supply module based on the LT1083CP voltage stabilizer. It has an adjustable output voltage from 1.25 to 48 V DC and an output current of up to 10 A

Miniature industrial relay with 3 changeover contacts rated at 10 A, 24 V DC coil, test button with mechanical lock and position indicator, designed for series 94 sockets. Finder 55.33.9.024.0010

The industrial wireless access point provides Wi-Fi 4 connectivity in the 2.4 GHz band, Wi-Fi Mesh, Fast Roaming, and support for up to 50 simultaneous wireless connections. Two RJ45 ports, an RS232 interface, and passive PoE support integration with network and serial devices in industrial installations. Teltonika DAP142

W25Q128JV flash memory module with 128 Mbit (16 MB) capacity. It supports communication via SPI, Dual or Quad SPI interface. Waveshare W25QXX DataFlash Board

DRV8825 Stepper Motor Driver Carrier is a DRV8825 stepper motor driver that allows you to supply a bipolar current of up to 1.5 A per phase, without using a heat sink. The system can be supplied with voltage up to 45V, in the set there is a heat sink. Polol 2133

The DIN Half B type connector is a male, right-angle half connector with 2x32 contacts, designed for use in electronic devices. It ensures reliable signal connections in compact spaces.

Module with the PAM8904 controller designed specifically to control piezoelectric elements. The amplifier operates over a wide frequency range, up to 300 kHz, and allows for gain up to approximately 13 Vpp. Adafruit 5791

Tri-color E-Ink display (ePapier) with a diagonal of 1.54 "and resolution 152x152 pixels with SPI controller, SRAM memory and a MicroSD card slot. Adafruit 3625

32-bit microcontroller from the STM32G0 family with ARM Cortex-M0 + core, 128kB Flash memory, 36kB RAM, up to 64MHz timing and I2C, SPI, UART / USART interfaces, LIN, IrDA, I2S, DMA, Motor Control PWM, Temp Sensor in LQFP64 housing. STMicroelectronics STM32G081RBT6

Module with a digital distance sensor with a range of up to 100 cm. It has a digital output that goes low when an object is detected. Pololu 4069

Euro (figure-8) power cable CEE 7/16 to IEC 320 C7, 3 m length, designed for powering RTV and IT equipment equipped with a C8 inlet. Rated current 2.5 A, 0.5 mm conductor, black plastic insulation. Lanberg CA-C7CA-10CC-0030-BK

OLED display 1.5 ", resolution 128x128 pixels, 3V SSD1327 SPI GRAY SCALE, work temp. From -40 to +70.

A LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 433 MHz frequency band and is equipped with a USB interface. Waveshare USB-TO-LoRa-LF-B

827229-1 is a 12-pin connector for THT mounting, suitable for automotive systems using TE\'s Timer contact technology. Designed for robust and reliable interconnections in demanding environments.

The Akyga AK-AD-57 adapter is a USB-C hub that extends one USB Type C port to USB 3.0 Type A and HDMI ports, allowing you to connect various peripherals, including monitors in Ultra HD (4K) resolution. The hub supports data transfer in both directions and is useful for devices that do not have USB A and HDMI ports. Akyga AK-AD-57