Finder 70.41.8.400.2030 is a voltage monitoring relay for three-phase AC networks with an interphase voltage of 380–415 V AC. The device allows for delay adjustment in the range of 0.5 to 60 seconds, and its output is a single-pole double-throw (SPDT) contact with a 6 A load capacity at 250 V AC. The relay is designed for DIN rail mounting and is equipped with screw terminals.

This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. This unit works great from 5 to 12V (datasheet shows 12V). You can also install a jumper wire past the 5V regulator on board to make this unit work at 3.3V. Sensor uses [email protected]. SEN-13285

Finder 77.31.8.230.8050 is a solid-state relay (SSR) with a load capacity of 30 A, designed for DIN rail mounting. It features a 230 V AC control input and supports loads in the range of 48–480 V AC. Equipped with screw terminals, it ensures fast and reliable switching in industrial applications.

Finder 95.55SPA is a relay socket with spring terminals, designed for DIN rail mounting, compatible with relays from series 40 and 44. Equipped with 8 pins with a 5 mm pitch, it ensures quick and secure connections in industrial applications.

Type 85.02 is a robust, multifunction time relay for industrial use, offering four timing functions, seven time ranges, and convenient DIN rail mounting.

Module with pressure and temperature sensor BMP280. It allows you to read the atmospheric pressure in the range from 300 to 1100 hPa and communicates via the I2C or SPI interface. Adafruit 2651

OS Preinstalled Flash Memory with Android

The gray Lanberg RJ45 plug cover is a protective element designed for RJ45 network plugs, made of PVC. These covers provide protection against mechanical damage and contamination, contributing to the longer durability of the RJ45 plugs.

MMA8451 Triple-Axis Accelerometer w/ 14-bit ADC, detects motion, tilt and basic orientation, wide usage range: from +-2g up to +-8g, easy to use with Arduino or another microcontroller. Adafruit 2019.

This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the disc. SEN-13332

A4988 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2980

32-bit microcontroller from the STM32F7 family with ARM Cortex-M7 core, 512kB Flash memory, 320kB SRAM, I2C, SPI, UART / USART memory, USB, CAN, 1.7 ... 3.6V, 144LQFP, STM, RoHS

The Lanberg Cat. 8.1 patch cord with Fluke Passed certification guarantees top quality and reliability, enabling optimal network connections compatible with various networking devices in any environment. Lanberg PCF8-10CU-0150-R

The Lanberg Cat. 8.1 patch cord with Fluke Passed certification guarantees top quality and reliability, enabling optimal network connections compatible with various networking devices in any environment. Lanberg PCF8-10CU-0500-W

The Lanberg Cat. 8.1 patch cord with Fluke Passed certification guarantees top quality and reliability, enabling optimal network connections compatible with various networking devices in any environment. Lanberg PCF8-10CU-0500-BK

2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay fits perfectly onto the Raspberry Pi 3/2/A+/B+. The display and touchscreen uses the hardware I2C Pins (SDA & SCL), SPI pins (SCK, MOSI, MISO, CE0) as well as GPIO #25 and #24. Adafruit 2423

This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109

The compact (0.4″ × 0.5″) D24V5F15 synchronous buck voltage regulator takes an input voltage of up to 36 V and efficiently reduces it to 15 V while allowing for a maximum output current of 500 mA. Pololu 2847

This kit includes four 16MP IMX519 cameras and a baseboard for the Raspberry Pi and NVIDIA Jetson AGX Orin, Orin Nano, and Orin NX platforms. The cameras are equipped with a Sony IMX519 sensor with autofocus that works in manual, automatic, and continuous modes, offering complete control over image sharpness. With single, dual, and quad modes, the kit is ideal for robotics, surveillance, and advanced computer vision systems, ensuring synchronization and high image quality. ArduCAM B0388