Waveshare 31063 e-paper display with a 3.97″ diagonal and 800 × 480 pixel resolution, operating in black and white with 4 gray levels, equipped with a Raspberry Pi HAT+ compatible driver board and SPI interface. Waveshare 3.97inch e-Paper HAT+

3.97" e-Paper (E-Ink) display module with a resolution of 800 × 480 px, supporting red / yellow / black / white colors. Designed for integration with SPI-based systems such as Raspberry Pi, Arduino, STM32 and ESP32. Features ultra-low power consumption and a paper-like display effect without backlight. Waveshare 3.97inch e-Paper (G)

3.97" e-Paper (E-Ink) display module with 800 × 480 px resolution, supporting red / yellow / black / white colors. HAT+ version with integrated driver board, SPI interface and standard Raspberry Pi 40PIN GPIO header, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32. Features ultra-low power consumption and paper-like display without backlight. Waveshare 3.97inch e-Paper HAT+ (G)

A 4-core cable with a length of 50 cm, both terminated with a Grove plug. Seeed Studio 110990038

5" IPS display with a resolution of 720x1280 px featuring a 5-point capacitive touch panel and MIPI DSI interface. The module includes toughened glass with optical bonding and an aluminum enclosure, compatible with Raspberry Pi and other embedded platforms. Waveshare 5-DSI-TOUCH-A

Module with ToF VL53L4CD sensor with a range of up to 1.3 m and a resolution of 1 mm. It is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 5396

3.7" E-Ink e-paper display with a resolution of 416×240 px supporting red, yellow, black and white colors. The display communicates via the SPI interface and is designed to operate with an external driver board or microcontroller. Waveshare 3.7inch e-Paper (G)

3.7" E-Ink display with a resolution of 416×240 px supporting red, yellow, black and white colors. The module with HAT+ driver board features an SPI interface and a Raspberry Pi 40-pin GPIO connector, compatible with Raspberry Pi, Jetson Nano, Arduino, STM32 and ESP32 platforms. Waveshare 3.7inch e-Paper HAT+ (G)

MiniPCIe wireless network card module based on the Intel AX210 chip supporting the Wi-Fi 6E (802.11ax) standard and Bluetooth 5.3. Enables communication in the 2.4 GHz, 5 GHz, and 6 GHz bands with maximum throughput up to 574 Mb/s (2.4 GHz) and 2400 Mb/s (5 GHz / 6 GHz), using MU-MIMO technology to improve transmission efficiency. The design features IPEX-4 antenna connectors and is compatible with Linux and Windows 10 / 11 systems. Waveshare Wireless-MINIPCIE-AX210

MiniPCIe wireless network card module based on the Intel AX200 chip supporting the Wi-Fi 6 (802.11ax) standard and Bluetooth 5.2. Enables communication in the 2.4 GHz and 5 GHz bands with maximum throughput up to 574 Mb/s (2.4 GHz) and 2400 Mb/s (5 GHz), using MU-MIMO technology to improve transmission efficiency. The design features IPEX-4 antenna connectors and is compatible with Linux and Windows 10 / 11 systems. Waveshare Wireless-MINIPCIE-AX200

12.3″ IPS touch display with 720 × 1920 resolution and DSI interface, designed for use with Raspberry Pi 5 / CM5 and selected platforms based on RK3576. The panel supports 10-point capacitive touch, features toughened glass with optical bonding technology, and includes a metal rear plate that improves structural rigidity and heat dissipation. The display offers 450 cd/m² brightness and 178° viewing angles. Waveshare 12.3-DSI-TOUCH-A

Small GPS location module with L80-39 GPS chip, USB and TTL two ports,easy to be used with Raspberry Pi, Arduino, STM32 and other kind of micrcontrollers. The GPS module uses NMEA0183 communication protocol, integrated ultra-small SMA antenna connector. DFRobot TEL0119

Industrial 7″ IPS HMI touch display with 720 × 1280 resolution, designed for use with Raspberry Pi 4 and Raspberry Pi 5. The screen supports 10-point capacitive touch, features toughened glass with optical bonding, and an aluminum enclosure for passive cooling. The display connects via dual HDMI interfaces and supports video output up to 4K. The kit includes a power supply, 64 GB microSD card, and mounting accessories, while Raspberry Pi is not included. Waveshare RPI-HMI-7A-ACCE (EU)

THT resistor, 0.25W, 5%, RoHS

Single-core, multi-strand wire in black silicone insulation. 18AWG thickness, 4m length

Voltage-to-current converter module designed for devices with a current signal input. It allows you to linearly convert voltage signals from 0 to 5 V into current signals from 0 to 20 mA

FTDI basic breakout Arduino USB-TTL ASP, RoHS

4 route MOSFET switch module V2.0, IRF540, RoHS

MEMS digital output motion sensor: ultra-low-power high performance 3-axis "pico" accelerometer, LGA12, STM, RoHS