Module with NEO-F9P GNSS receiver. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo and Beidou, and offers accuracy of up to 10 mm using an RTK base station. It offers five communication ports: USB type C, UART1, UART2 for RTCM, I2C and SPI reception and Qwiic connectors. SparkFun GPS-23288

GNSS receiver based on the UM980 module. It allows you to track signals from several satellite systems, including GPS, GLONASS, Galileo, Beidou, QZSS and SBAS, and offers an accuracy of up to 8 mm using an RTK base station. SparkFun GPS-23286

Serial port to Ethernet converter module based on the ESP32 series from Wireless-Tag. It integrates an optimized TCP/IP protocol stack and is characterized by extremely high performance, stability, versatility and reliability. WT32-ETH01

High-quality cable equipped with a standard RS232 connector with a DB9 socket and an RJ45 connector. Provides the ability to connect devices with an RJ45 connector to a computer for debugging and communication via the serial port. Waveshare RS232-TO-RJ45-Console-Cable

COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 1000 mA, offering a wide beam angle of 120 °

The PRT-16764 is a 20-pin extended female GPIO header, designed to expand connections on PCBs such as Raspberry Pi, Google Coral and NVIDIA Jetson. It allows you to easily connect additional modules, ensuring stable and reliable connections.

A miniature module with a LiPo battery charger with a capacity of 500 mA. SparkFun DEV-11893

AMOLED 5.5" display with 1920x1080 resolution and 60Hz refresh rate. The display is equipped with a capacitive touch screen with support for up to 10 points as part of the Multi-touch function. Compatible with Lattepanda, Raspberry Pi and other devices with HDMI output. DFRobot DFR0524

LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Included with a USB Type-C adapter. Waveshare RP2040-LoRa-HF-Kit

LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Waveshare RP2040-LoRa-HF

LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 410 to 525 MHz. Comes with a USB Type-C adapter. Waveshare RP2040-LoRa-LF-Kit

Module with ToF distance sensor based on the VL6180X system. It offers a range of up to 10 cm and communicates via the I2C interface. SparkFun SEN-12785

Module with a 4-color e-Paper display with a diagonal of 2.66" and a resolution of 360x184 px. It uses communication via the SPI interface via the popular JST GH1.25 connector. Waveshare 2.66inch e-Paper Module (G)

High-quality cable equipped with a standard USB type A connector and an RJ45 connector. The integrated FT232RL FTDI converter ensures reliable signal conversion and optimizes data transmission speeds ranging from 300bps to 921600bps. Waveshare USB-TO-RJ45-Console-Cable

Camera module with Sony IMX219 sensor designed for Raspberry Pi 5 users. It offers a resolution of 8 MP (3280 x 2464 pixels) and a wide viewing angle of 79.3°. Comes with FPC CSI tape. Waveshare Pi5-IMX219-77

Converter with a built-in microcontroller (MCU) and a CAN transceiver system. It can work with devices with an operating voltage of 3.3 V via goldpin connectors with a pitch of 2.54 mm. The converter facilitates the design and prototyping of devices based on the CAN bus. Waveshare WS-TTL-CAN

Development board with LoRa Semtech SX1262 module and Apollo 3 Bluetooth 5 integrated in the NM180100 chip. It supports the 868 MHz and 915 MHz bands and Bluetooth Low Energy. It is compatible with the Qwicc system. SparkFun 17506

Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.13