Module with a 3-axis LIS331HH accelerometer. The system has a user selectable measurement scale of ±6g/±12g/±24g. It communicates via the I2C interface. DFRobot SEN0407

8 Mpx camera module with IMX219 sensor and wide-angle "fisheye" lens. To be used as a replacement on the RPI Camera Board V2. ArduCAM B0286

Laser distance sensor with a large measuring range from 0.2 m to 350 m. Optimized for industrial applications and work in difficult weather conditions. Benewake TF350 RS485/RS232

The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M

The protection circuit for one Li-Ion cell with a voltage of 3.7 V. It has the function of charging, discharging and over-discharge protection. The cells can be discharged with a continuous current of up to 6 A

BMS module for three Li-Ion cells with a voltage of 11.1 V. It has the function of charging with a balancer, discharging and over-discharge protection. The cells can be charged with a continuous current of up to 12 A

A set containing 560 pcs of colored connecting cables of various lengths, intended for connecting fields in contact plates. BBJ-560

Audio receiver with Bluetooth 4.2 module. It is powered by a microUSB connector or a battery and is equipped with a charging circuit

Step-Up converter module XL6009 with adjustable output voltage from 1.3 to 35 V, input voltage from 3.8 to 32 V and a maximum output current of 3 A

Module with analogue UV light sensor ML8511. It enables the measurement of the radiation intensity for the UV-A (320-400nm) and UV-B (280-320nm) waves. It has an analog interface. GY8511

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it is equipped with a microUSB connector. Cytron UC00A

Module with waterproof barometer and MS5837 temperature sensor. It enables pressure measurement in the range from 300 to 1200 hPa and communicates via I2C

Plastic semi-circular lens with an outer diameter of 40 mm. Adafruit 3853

Dual-channel DAC converter compatible with the SYZYGY standard. The module can simultaneously generate two 5V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod AWG 1411 410-397

Dual-channel ADC converter compatible with the SYZYGY standard. The module can simultaneously obtain two 25V signals with 14-bit resolution and sampling frequency up to 100MS/s. The module is compatible with Eclypse Z7 and Genesys ZU evaluation kits. Digilent Zmod Scope 1410-105 (410-396)

AK-NB-01A is a solid 3-pin clover network cable of the Pro series, 1.5 m long. Designed to supply laptop adapters and all other IEC C5 compatible plugs. The cable is compatible with most power supplies available in our offer. Akyga AK-NB-01A

The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy. Pololu 3140

Camera for Raspberry Pi minicomputers. Works with all versions of minicomputers with a CSI socket. The camera is equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Raspberry Pi HQ Camera

Kit with GNSS RTK Express receiver, L1/L2 antenna and accessories. It allows you to get centimeter-level global positioning measurements using GNSS RTK. SparkFun GPS-18380

Module with DC motor driver DRV8256P. It can work with motors supplied with the voltage from 4.5 to 48 V and the current consumption up to 1.9 A. Pololu 4039