Female terminal block, 8-pin. Pitch 5.0mm. Height 15mm. 2EDGK-5.0-8P

This powerful step-up/step-down regulator efficiently produces an adjustable 4 V to 12 V output from input voltages between 3 V and 30 V while allowing a typical output current of up to 2 A when the input voltage is close to the output voltage and offering typical efficiencies of 80% to 90%.

A two-channel DC motor controller with a UART TTL interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. Board with soldered connectors. Pololu 5066

USGlobalSat\'s EM-506N5 GPS receiver is based on a powerful GNSS receiver from MediaTek, which operates in the L1 band. It allows determining geographic location with an accuracy of up to 2.5 meters. SparkFun GPS-19629

A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with connectors for mounting. Pololu 5065

2-wire cable with JST plug, cable ends are tinned, length 15 cm, 2mm pitch. The cable has an additional 2-pole angled cable-to-board socket

Case dedicated to protect GNSS receivers against difficult field conditions. Custom slots are molded into the case to hold the Facet RTK receiver, 915MHz radio with antenna, power supply, cables and adapters. SparkFun PRT-19642

Kit with Facet L-Band GNSS RTK receiver and accessories. Get centimeter-level global positioning measurements with GNSS RTK. SparkFun GPS-20000

Functional module for MicroMod boards. It allows you to add cellular communication to your project using the Notecard - NOTE-NBGL-500 from Blues Wireless. SparkFun WRL-20409

An adapter dedicated to the FLIR Lepton thermal imaging camera. It has been preconfigured to operate as a USB plug-and-play UVC 1.0 camera, and can also communicate via UART and I2C interfaces. SparkFun DEV-20812

Gravity: Digital Water Flow Sensor is a liquid flow sensor that uses a Hall sensor. Powered by 5 ... 12V voltage. DFRobot SEN0216

Infrared Camera Module. ArduCAM B0059

HUB with USB 3.2 Gen1 interface designed for industrial use. Equipped with 4 output ports and 2 host input ports with switch. Enclosed in a metal housing. Waveshare USB3.2-Gen1-HUB-2IN-4OUT

Adafruit Universal Thermocouple Amplifier MAX31856 is an amplifier module for thermocouples. It was based on the MAX31856 chip. The module is fitted with K, J, N, R, S, T, E or B thermocouples. The SPI interface is used for communication. Adafruit 3263

RGB LED matrix display with 64x32 resolution (2048 LEDs). It has a HUB75 interface and can work with Raspberry Pi, Arduino or ESP32. Waveshare RGB-Matrix-P2.5-64x32

3D Gesture Sensor (Mini) is an inductive gesture sensor detecting such effects as turning clockwise / counterclockwise or the direction of movement. It is powered by 3.3 ... 5V and the range of gesture detection is up to 5cm. DFRobot SEN0202

The Step Down converter module converts the voltage in the range of 6-40V to 1.2-35V with an efficiency of 96% and can work with an intensity of up to 20A. Its compact dimensions and operating temperature range from -10°C to 75°C make it ideal for many electronic applications.

A two-channel DC motor controller with an I2C interface. It is powered from 4.5 V to 48 V and can deliver up to 1.8 A per motor. A board with soldered connectors. Pololu 5064

Module with light intensity sensor TSL2591. Equipped with STEMMA QT connector with I2C interface. Adafruit 1980

Camera module with USB interface. It is equipped with an IMX179 CMOS sensor with a resolution of 8 MP and a lens with a 63° viewing angle with autofocus function. It has a built-in digital microphone. Version with metal case. ArduCAM B0447C