A compact, wireless light and sound effects controller based on the RP2040 microcontroller with a Raspberry Pi RM2 Wi-Fi and Bluetooth module. It allows you to control mono and RGB LEDs, create lighting animations, and play sound effects thanks to the built-in I2S audio amplifier. It supports sensors and modules via Qw/ST and JST-SH connectors, and effects can be triggered by motion, sound, or remotely over the network. Pimoroni PIM728

The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Board with connectors. Waveshare RP2040-Plus-16MB-M

Development board with RP2040 and ESP-12E microcontroller. Equipped with 0.91" OLED display. SB Components 24186

This Raspberry Pi Pico development board is based on the RP2350B microcontroller with dual Arm Cortex-M33 cores running at up to 150 MHz. It offers 520 KB of SRAM, 16 MB of Flash, and 8 MB of PSRAM, making it ideal for memory-intensive projects. It features a USB-C connector, a Qw/ST port for I2C sensors, an SP/CE connector, an SWD debug interface, and reset and boot buttons. Pimoroni PIM724

Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM686

Module with e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.9 

A compact board that allows you to control up to 8 servos simultaneously, making it ideal for advanced robotic projects. Equipped with standard 3-pin connectors, it allows you to easily connect servos without soldering, and additional GPIO pins and a 3V power supply from Pico allow you to expand your projects with new devices. The board\'s power supply is stabilized, and additional features such as an on/off switch and reverse polarity protection increase its safety and convenience of use. Kitronik 5339

Camera adapter based on Raspberry RP2040, dedicated to TinyML development. is equipped with a 2.4-inch LCD screen, microphone, camera connectors and an IMU module. It allows you to take photos, use WiFi, SD card and USB mass storage. ArduCam B0432

Module with a round 0.99" IPS LCD display with a resolution of 128x115 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-LCD-0.99-B

A compact development board based on the RP2350B microcontroller with dual Arm Cortex-M33 cores running at up to 150 MHz, designed for projects requiring a high pin count in a minimal footprint. It offers 520 KB of SRAM, 16 MB of Flash, and 8 MB of PSRAM, as well as 48 GPIO lines, including 8 ADC inputs, arranged in a 2.54 mm pin grid array. The lack of onboard USB, LEDs, or buttons limits the board\'s size to 25.4 x 25.4 mm, giving you complete freedom in designing your own electronics. Pimoroni PIM722

Addressable LED strip controller based on the RP2350A microcontroller with dual Arm Cortex-M33 cores up to 150 MHz. It supports popular WS2812/Neopixel and APA102/Dotstar LEDs and allows for powering and programming via USB-C with current up to 3 A. It features screw-type LED connectors, a built-in RGB LED, user buttons, and a Qw/ST connector for connecting I2C sensors. Pimoroni PIM723

Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM674

This Raspberry Pi RP2350B microcontroller development board features a dual-core ARM Cortex-M33 or Hazard3 RISC-V processor. It features a 2.8-inch 480x480 circular IPS display with a capacitive touchscreen and LVGL support. It includes 16MB of flash memory, a real-time clock, a 6-axis motion sensor, a microSD slot, and a lithium battery connector. It\'s ideal for HMI, IoT, and smart wearable device projects. Waveshare RP2350-Touch-LCD-2.8C

Module with LCD IPS touch display with a diagonal of 2.8" and a resolution of 320x240 px. Communication via the SPI interface. Waveshare Pico-ResTouch-LCD-2.8

RP2350-LCD-0.96 offers a low-cost and flexible solution for creating projects involving information display, battery-powered operation, and full GPIO control. Ideal for portable devices, user interfaces, and educational applications.

Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173

Universal module dedicated to e-Paper displays. It is equipped with connectors compatible with the Raspberry Pi Pico. It allows you to connect a display through one of the two FPC sockets. SB Components 26241

Module with a matrix LED RGB 7x16 display (112 LEDs) designed to work with the Raspberry Pi Pico. It communicates via a digital interface. Pimoroni PIM546

Module with BME688 chip and BH1745 color and light intensity sensor equipped with Raspberry Pi Pico W. Pimoroni PIM630

Pimoroni Tiny 2350 PIM766 in the Headered version is a compact development board with the RP2350A, 4 MB of flash memory and a USB-C connector, created for miniature projects. Thanks to the integrated pins, support for MicroPython and the Qw/ST port, it works well in prototyping portable devices and wearables.