Programmable buzzer controller with six buttons, designed to work with Raspberry Pi Pico W and offering pinouts for many pins. It is ideal as a remote control for the Kitronik Autonomous Robotics (Buggy) platform, and thanks to its compact size and lack of a display, it is a cost-effective solution for controlling robots and vehicles in DIY projects. Kitronik 5353

Pin expander designed for Raspberry Pi Pico boards. It is equipped with a standard female connector and an additional set of female 2x20 pin strips. Kitronik 5341

RP2350-LCD-1.47-B-M is an advanced yet compact development board designed to work with the RP2350A microcontroller. The integrated LCD display, USB Type-A port, TF card slot, and pre-soldered headers facilitate quick setup and easy integration into various projects. The dual architecture (ARM and RISC-V) provides great flexibility for learning and testing embedded applications, control systems, and IoT devices.

A pin expander for Raspberry Pi Pico boards. It is equipped with a standard female connector and two sets of male strips 2x20 pins. Waveshare Pico-Dual-Expander

USB RTC module based on Raspberry Pi RP2040 microcontroller. It combines MicroSD card slot, LCD display and CR1220 battery holder. SB Components SKU25138

Module with a 3-color e-Paper display with a diagonal of 2.66" and a resolution of 296x152 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.66-B

RP2040-Touch-LCD-1.69 is a high-performance, integrated MCU board designed for interactive device developers. With a touch display, 6-axis sensor, RTC, and power management, it is suitable for HMI systems, mobile devices, data loggers, and IoT solutions. Support for MicroPython and Arduino facilitates rapid prototyping and deployment.

Development board with RP2350 microcontroller and a 7-inch LCD display with 800 x 480 resolution and 65K colors, supporting dual-core and dual-architecture operation, in a version without touch support. Waveshare RP2350-LCD-7

Module with IPS LCD display with a diagonal of 2" and a resolution of 320x240 px. Communication via the SPI interface. Pimoroni PIM580

Module with a round 1.28" IPS LCD touch display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-Touch-LCD-1.28-B

Module with environmental sensors designed for Raspberry Pi Pico. It allows you to measure temperature, humidity, pressure, illuminance, detection of VOC, IR and UV radiation and orientation. Waveshare Pico-Environment-Sensor

Module with 4 relays and optoisolation. Equipped with RP2040 chip and ESP8266 WiFi module. Can communicate via RS485 bus. SB Components 24124

Development board based on the RP2350B microcontroller with a 4-inch IPS display (480 × 480 px) and a 5-point capacitive touch panel, featuring CAN, RS485, I2C interfaces, RTC, a 6-axis IMU, and a TF card slot. Designed for modern HMI interfaces and multi-touch control systems. Waveshare RP2350-Touch-LCD-4

Module with 3-color e-Paper display with a diagonal of 2.9" and a resolution of 296x128 px. Communication via the SPI interface. Waveshare Pico-ePaper-2.9-B

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 16 MB of QSPI flash memory. The system can be programmed in C/C++ or microPython. SparkFun DEV-17745

Module with BME280 sensor, microphone and PMSA003I air quality sensor equipped with Raspberry Pi Pico W. Accessories included. Pimoroni PIM639

The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884

This modern development board features a dual-core Cortex-M33 microcontroller clocked at 150 MHz, 520 KB of RAM, and 8 MB of QSPI Flash. It features a rich set of interfaces, including I2C, SPI, UART, 24 PWM channels, and an HSTX port for high-speed differential data transfer. The board features a STEMMA QT connector, a built-in 200 mA+ LiPo charger, a USB-C port with a UF2 bootloader, and NeoPixel LEDs and a red LED for signaling. The Feather RP2350 is compatible with MicroPython, CircuitPython, Arduino, and C/C++. Adafruit 6000

NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650

RP2350-Tiny is a minimalist development board based on the RP2350A microcontroller with dual Cortex-M33 and RISC-V architecture, without an integrated USB port. Instead, it features an FPC connector for attaching an external USB-C adapter (not included). The module offers extensive GPIO and peripheral functionality, drag-and-drop programming, support for C/C++ and MicroPython, and SMT mounting capability. It is ideal for embedded projects where minimal space and flexible connectivity are essential.