Category: Main categories

Din rail enclosure Z103 ABS V0

This black polyurethane scooter/skate wheel measures 84 mm in diameter and 24 mm in width and works with standard 608 bearings as well as our Aluminum Scooter Wheel Adapters, which allow these wheels to be used with an assortment of motors. Pololu 3275

This black polyurethane scooter/skate wheel measures 70 mm in diameter and 25 mm in width and works with standard 608 bearings as well as our Aluminum Scooter Wheel Adapters, which allow these wheels to be used with an assortment of motors. Pololu 3272

Din rail enclosure Z104 lightgray ABS V0

A compact 8MP USB camera module with an autofocus lens and built-in microphone. Based on the Sony IMX219 sensor, it captures 3280 x 2464 px video at 30 FPS, providing detailed image and sound in a single device. UVC compliance and a wide 62° field of view make it ideal for VR, surveillance, microscopy, and embedded applications without the need for additional drivers. ArduCAM B0431

This industrial-grade USB camera is optimized for low-light conditions thanks to a high-sensitivity Sony IMX291 sensor with a wide dynamic range (80 dB). Equipped with a wide-angle M12 lens (120°) and a waterproof metal housing, it\'s ideal for surveillance, VR, industrial, and on-board applications. The camera records in Full HD 1080p at 30 fps, supports UVC, and requires no driver installation. It also offers a built-in microphone for audio recording. ArduCAM B0448

This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3×0.8″ board supports a wide 6.5V to 40V voltage range and is efficient enough to deliver a continuous 13A without a heat sink. Driver includes reverse-voltage protection along with basic current sensing and current limiting functionality. Pololu 2992

A round lamp on an adjustable arm, with a magnifying glass of 5x magnification, equipped with a vise enabling mounting to the table / top. ZD-129A

Hermetic casing ZP90.90.75 light bottom - colorless top with a gasket and brass PC sleeves

Module with an oxygen concentration sensor in the environment. It allows you to measure the volume of oxygen in the range from 0 to 100%. It communicates via the I2C interface. DFRobot SEN0496

LED strip with COB diodes in cold blue. It is powered by 12 V DC, has a length of 1 m and 384 LEDs/m. Protection level IP20

Corner connector for V-shaped mounting profiles. In black

Corner connector for U-shaped mounting profiles. In white

GY-9255 is a 9 Degrees of Freedom (9DoF) module with the InvenSense MPU-9255 chip. It has a built-in gyroscope, accelerometer and magnetometer

REFLEX METER - SELF-MOUNTING KIT

The L78L33ACU voltage regulator provides 3.3 V output at up to 100 mA with low quiescent current. It is intended for low-current electronic applications where voltage stabilization with input up to 30 V is required.

Mounting bracket with a magnifying glass with a diameter of 85mm, with grippers, a spiral for a soldering iron, a cleaner and a sponge to clean the tip, a space for rosin and LED backlight. ZD-10Y

A Category 6 UTP patch cord, 20 meters in length, is a reliable solution for high-speed network connections. Made with stranded cable construction (7*0.16 mm) and a PVC insulation diameter of 5.4 mm, it supports operation up to 250 MHz. Compatible with ANSI/TIA/EIA-568B standards, it offers durability and high quality for telecommunication installations. Lanberg PCU6-10CC-2000-W

The third hand tool is a mounting bracket with a magnifying glass 2.5 times, two smaller loupes and LED backlight. ZD-126-2