Category: Main categories
Subcategories
There are 23386 products.
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22631
A compact development board that uses the ESP32-PICO-MINI chip. It provides wireless communication via Bluetooth and serves as an easy-to-configure UART converter. It has a built-in PCB antenna. SparkFun WRL-24113
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 60 m, while in open space it reaches up to 1200 m. SparkFun WRL-22628
development and prototyping platform for the LARA-R6 LTE Cat 1 module from u-blox. The LTE Stick uses the LARA-R6401 version, which supports both data and voice for North America and works with the LTE bands used by AT&T, Verizon, T-Mobile and FirstNet networks. SparkFun CEL-23618
Industrial server with a CAN, RS485 and Ethernet port that allows communication between CAN devices and the network server. It has built-in 2 CAN channels, 1 Ethernet port and a TCP/IP stack. It is enclosed in a metal housing with an industrial design. Waveshare 2-CH-CAN-TO-ETH
Module with an e-Paper display with a diagonal of 4.26" and a resolution of 800x480 pixels. Thanks to communication via the SPI interface, it allows easy integration with various systems of microcontrollers and single-board computers, including Raspberry Pi. Waveshare 4.26inch e-Paper HAT
RF module providing wireless communication compliant with the IEEE 802.15.4 standard. They operate in the 2.4 GHz ISM band and enable local configuration via BLE with the Digi XBee mobile application. They are equipped with the Silicon Labs EFR32MG SoC transmitter and receiver chipset. The range in buildings is up to 90 m, while in open space it reaches up to 3200 m. SparkFun WRL-22629
Low Noise, 90 MHz, Variable Gain Amplifier, SOIC8, Analog Devices, RoHS
Set of small bolts (M1, M1.2, M1.4) and nuts (M1.2, M1.4). Made of stainless steel, packed in a handy round box
Matte PET-G filament, white, diameter 1.75 mm. There is 0.85 kg of filament wound on the spool. Fiberlogy Matte PET-G White
CPE ANTIBAC filament in natural color with a diameter of 1.75 mm. There is 0.5 kg of filament wound on the spool. Fiberlogy CPE ANTIBAC Natural
The Tic 36v4 USB Multi-Interface High-Power Stepper Motor Controller makes basic control of a stepper motor easy. Pololu 3141
This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). Pololu 2489
An adapter that allows you to connect modules in the XBee format to a computer via the USB Type-C interface. The adapter is based on the FT231XS system. SparkFun WRL-22043
Base board for prototyping IoT applications using the new Digi XBee 3 Low-Power LTE-M/NB-IoT and Digi XBee RR modules. It gives access to the full functionality of the XBee module pins, including two USB Type-C connectors for UART communication and firmware updates, a Qwiic connector for I2C-compatible sensors and peripherals. SparkFun WRL-21636
Miniature, 12V brush DC motor with metal gear with 15.25: 1 ratio. It has a cross section of 10 × 12 mm, and the D-shaped output shaft has a length of 9 mm and a diameter of 3 mm. It also has an extended motor shaft with dimensions of 4.5 × 1 mm. Pololu 4789
A set of ferrules terminals. The box contains 840 connectors in three colors: red, green and yellow. Connectors are designed for wires from 10 to 20 AWG.
Set of four ratchet combination wrenches (10-19mm), made of chrome vanadium CrV steel, with a 72-tooth ratchet, chrome-plated surface, including wrench sizes 10, 13, 17 and 19 mm. Vorel - 52661
Pneumatic grinder, powered by compressed air at a pressure of 6.3 bar, reaches up to 20,000 rpm, has a 1/4" quick connector and a 6 mm spindle, capacity of 113 l/min, equipped with a connector for the pneumatic system and keys for mounting accessories, allows cutting and grinding of various materials. Vorel - 81110
