Category: Main categories

The JBC-C210001 tip with a 0.3 mm conical end provides high precision for soldering small components. Designed for the JBC T210 handle, it is used in precision electronics and SMD device servicing.

LPC11U24FHI33/301 is a low-power ARM Cortex-M0 microcontroller with a USB 2.0 controller, dedicated to industrial, medical, and consumer applications. Integrated peripherals and a compact package enable flexible design of modern embedded systems.

DRV8825 Stepper Motor Driver Carrier with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. Pololu 2982

Gravity module designed based on the GP8101S system. It is a single-channel DAC (analog-to-digital) converter with PWM communication that offers an output signal with 8-bit resolution and 0.2% accuracy. It allows you to generate analog signals with a voltage range from 0 to 10 V or 0 to 5 V. DFRobot DFR1036

The JBC-CD-2SQF digital soldering station with T210-A handle is designed for precision soldering with temperatures up to 450°C. It enables fast and safe soldering on densely packed PCBs, offering advanced parameter control and compatibility with over 30 C210 series tips.

DC-DC Step-Down converter module. It has an input voltage from 9 to 45 V, an output voltage of 9 V and a maximum output current of up to 2.9 A. Pololu 4895

DC-DC Step-Down converter module. It has an input voltage from 7.5 to 45 V, an output voltage of 7.5 V and a maximum output current of up to 3 A. Pololu 4894

DC-DC Step-Down converter module. It has an input voltage from 6 to 45 V, an output voltage of 6 V and a maximum output current of up to 3.3 A. Pololu 4893

Tiny programmable module featuring Microchip’s PIC18F25K50 microcontroller. It packs a Micro-USB interface and 16 digital input/output pins onto a 1″×0.6″ board and ships preloaded with a USB bootloader, so no external programmer is required. Pololu 3150

hb02w-b-220-08

This is a little 5" TFT display with WVGA 800x480 resolution and it has a resistive touchscreen overlay. The driver board only has an HDMI input but for Raspberry Pi, BeagleBone Black and other computers. Adafruit 2109

WiFi 2.4 GHz, IEEE Std. 802.11b RF Transceiver Module, Connector for External Antenna, Microchip, RoHS

Particle’s IoT (Internet of Things) hardware development kit, the Photon, provides everything you need to build a connected project. Particle has combined a powerful 120Mhz ARM Cortex M3 micro-controller with a Broadcom Wi-Fi chip in a tiny thumbnail-sized module called the PØ (P-Zero)

Module with an IPS LCD display with a diagonal of 7" and a resolution of 1024x600 pixels dedicated to Raspberry Pi Pico boards. It uses the DVI interface for communication. Waveshare PICO-DVI-7inch

A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero

IPS LCD display with a diagonal of 7.9" with built-in Hi-Fi speakers. It is equipped with an HDMI interface and offers a resolution of 400 x 1280 pixels. Waveshare 7.9inch Side Monitor

This level shifter board contains 3 x TSX0108E bi-directional level shifter ICs. The 30-pin and 12-pin GPIO ports on the XU4 are converted to the more common 0.1inch (2.54mm) pitch 40-pin header. All the signals can be level shifted to 3.3V or 5V.

GPS module with LC29H GNSS receiver designed to work with the Raspberry Pi minicomputer. It allows you to receive data from major positioning systems, including GPS, QZSS, GLONASS, Galileo and BeiDou, and supports fast, dual-band RTK positioning. Waveshare LC29H(DA) GPS/RTK HAT

NUCLEO-WB09KE is a low-power STM32 development board with the STM32WB09KE microcontroller and Bluetooth Low Energy v5.4 support, designed for creating wireless applications. ST morpho and ARDUINO Uno V3 connectors enable rapid prototyping and expansion of IoT systems.

The power module is equipped with a LiPo battery charging system. It allows you to power the board with a battery and create a portable IoT device. SparkFun DEV-13626