Category: Main categories

ESP32-S3 development board featuring a dual-core 240MHz processor, 2.4GHz Wi-Fi connectivity, 32MB Flash and 16MB PSRAM, supplied in a version with factory pre-soldered pin headers, designed for AIoT and embedded system projects. Waveshare ESP32-S3-DEV-KIT-N32R16V-M

Development board based on the ESP32-S3-WROOM module with a dual-core 240 MHz processor, 32 MB Flash and 16 MB PSRAM, supporting 2.4 GHz Wi-Fi and Bluetooth LE, designed for IoT and AIoT projects. Waveshare ESP32-S3-DEV-KIT-N32R16V

Development board based on the ESP32-S3 microcontroller, featuring a round 1.32-inch AMOLED capacitive touch display with a resolution of 466 × 466, support for 2.4 GHz Wi-Fi and Bluetooth 5 LE, as well as audio circuitry and expansion interfaces. Designed for wearable projects, user interfaces, IoT applications, and voice interaction solutions. ESP32-S3-Touch-AMOLED-1.32

ESP32-C6 1.32inch AMOLED Round Touch Display Development Board, 466×466 Pixels, QSPI Interface, Supports Wi-Fi 6 and Bluetooth 5. ESP32-C6-Touch-AMOLED-1.32

Industrial CAN FD protocol converter enabling bidirectional communication with Ethernet, RS232, and RS485, supporting 5 data conversion modes and CAN 2.0A and CAN 2.0B protocols. Waveshare CAN FD ETH RS232/RS485 Converter

Integrated AC PoE router with five Gigabit Ethernet ports, supporting IEEE 802.3af/at PoE output and centralized access point management. Waveshare Gigabit-POE-Router-AC (EU)

Industrial CAN FD protocol converter enabling bidirectional communication with RS232 and RS485 interfaces, supporting 5 data conversion modes and CAN 2.0A and CAN 2.0B protocols. Waveshare CAN FD TO RS232/RS485

Development board based on the ESP32-S3 microcontroller, featuring a 1.83 inch IPS touch display with a resolution of 240 x 284, WiFi and Bluetooth 5 connectivity, onboard audio codec, microphones, speaker, and an included 3.7 V lithium battery, designed for IoT projects and interactive applications. Waveshare ESP32-S3-Touch-LCD-1.83

3.5-inch DSI touchscreen with an IPS panel, 5-point capacitive touch, and 640 × 480 resolution, designed for Raspberry Pi series boards. Waveshare 3.5inch DSI LCD (E)

Hirose FX2 – 100-pin socket connector for expansion boards, compatible with FX2 interface systems such as Nexys and Spartan-3E FPGA boards. Enables designing custom hardware expansions for FPGA platforms.

Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 560mAh, equipped with a PCM protection circuit with an NTC temperature sensor and a lead with a 3-pin Molex 1.25 connector, 80mm long. Akyga AKY0833

Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 750mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0655

Pmod8LD - 8 high bright LEDs

Lithium-polymer battery type LP103035 with a nominal voltage of 3.7 V and a capacity of 1050 mAh, equipped with a PCM protection circuit and a JST 2.54 2-pin connector on a 150 mm cable. Akyga AKY0662

Angular contact strip in black, double-breasted, female, 2x40, pitch 2.54mm, THT, RoHS. PBD80R

Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 400mAh, equipped with a PCM protection circuit and a lead with a 2-pin Molex 1.25 connector, 150mm long. Akyga AKY0822

ARM Cortex-M3 CPU, 256kB Flash, 64kB RAM, USB OTG FS, 2xCAN, 5xUART, 2xI2C, 2xSPI, ADC, DAC, STM, LQFP64, RoHS

ARM Cortex-M3 CPU, 128kB Flash, 32kB RAM, USB OTG FS, 2xCAN, 5xUART, 2xI2C, 2xSPI, ADC, DAC, STM, LQFP64, RoHS