Category: Main categories

Module with a capacitive fingerprint reader with UART and USB interface. Waveshare Capacitive Fingerprint Reader

Module with 3 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4243

Camera module with USB interface. Equipped with a CMOS OV2710 sensor with a resolution of 2 MP and a lens with a viewing angle of 145°. Waveshare OV2710 2MP USB Camera (A)

Camera module with USB interface. Equipped with a CMOS IMX179 sensor with a resolution of 8 MP and a lens with a viewing angle of 145°, it has a built-in microphone. Waveshare IMX179 8MP USB Camera (A)

Camera module with IMX290 sensor with a resolution of 2 MPx dedicated to the Raspberry Pi. Equipped with an IR-CUT filter. Waveshare IMX290-83 IR-CUT Camera

Module with 3 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4203

Extension module with a driver for two stepper motors based on the HR8825 system. Dedicated for Raspberry Pi minicomputers. Waveshare Stepper Motor HAT (B)

Module with 2 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4442

A small size gripper driven by a servomotor with a movement range of 32 mm. It contains a special micro servo with an additional wire that gives access to its feedback, so you can track the actual position of the gripper blades. Polol 3551

I/O module for use with the S7-1200 PLC. It has 16 inputs and 16 digital outputs. Siemens 6ES7223-1BL32-0XB0

Arduino board for industrial applications dedicated to Arduino Portenta H7 boards. It allows the use of, among others artificial intelligence in production halls. Arduino AKX00032

Module with 8 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4248

Step-Up converter U3V70A with an output voltage from 4.5 to 20 V, an input voltage from 2.9 to VOUT and a maximum output current of 10 A. Pololu 2890

Development kit based on the Arm Cortex-M4 32-bit microcontroller with a frequency of 180 MHz. The module has a built-in 2MB Flash memory, 256 KB SRAM, SDRAM controller, HS USB and Ethernet MAC. TWR-K65F180M

Starter set LPCXpresso802 with LPC802 microcontroller (Cortex-M0). The set is equipped with a built-in programmer, buttons, diode and SPI Flash memory. NXP OM40000

Adapter with a set of connectors specific to the Raspberry Pi 3 Model B/B+. It allows you to adapt the minicomputer Raspberry Pi Zero and Zero 2 W to projects based on Pi 3 model B/B+. Waveshare Zero-to-Pi3-Adapter (A)

FRDM-K22F-AGM01 is a set of development plates containing a base plate and a board with a set of 9-axis sensors with an accelerometer, a gyroscope and a magnetometer. FRDM-K22F-AGM01

FRDM-K28F is a development board for Kinetis microcontrollers based on ARM Cortex-M4 with numerous peripherals including 6-axis digital accelerometer and magnetometer, USB interface, microSD card slot, three-color LED and two user buttons. FRDM-K28F

QN9080-DK is a development kit with the NXP BLE SOC QN9080 chip. This system has an integrated 32-bit ARM Cortex-M4F core and a Bluetooth communication system (BLE v5.0). In addition to the board with the QN9080 chip, the set includes a USB dongle (also with the QN9080 chip) which suits the master / slave communication between the two QN9080 chips.

A development kit containing the A71CH Plug & Trust module, enabling easy and fast creation of secure IoT applications. NXP OM3710 / A71CHARD