Category: Main categories

Probe for measuring direct and alternating current up to 100 A. It works in the 2,5 MHz band, it can be connected to the oscilloscope through the BNC connector. Powered by USB. Micsig CP2100B

A module with a microSD card slot and a pin connector (2.54 mm pitch). It has a built-in voltage regulator and a voltage level converter. The SPI interface lines are led out on the connector

Waterproof momentary button with a diameter of 12 mm and a height of 25 mm in a stainless steel housing. Blue color

Waterproof latching button with a diameter of 12 mm and a height of 25 mm in a stainless steel housing. White color

Switch-mode power supply with an output voltage of 12 V and current efficiency of 5 A. The cable is terminated with a 5.5 x 2.1 mm DC plug and has built-in overload, overvoltage and short-circuit protection. URZ1193

Waterproof latching button with a diameter of 12 mm and a height of 25 mm in a stainless steel housing. Yellow color

Step-Up converter U3V70F15 with an output voltage of 15 V, an input voltage from 2.9 to 15 V and a maximum output current of 10 A. Pololu 2896

The SIMATIC ET 200SP peripheral module is a module of 8 binary inputs with an input voltage range up to 24 V. Powered by 24 V. It has built-in diagnostic diodes and an alarm. Siemens 6ES7136-6BA00-0CA0

2-position waterproof self-locking rotary switch, 19 mm in diameter, in a stainless steel housing. Blue colour

A set of four aluminum heat sinks for Raspberry Pi 4 model B minicomputers. Equipped with an adhesive tape for easy installation

A set of three copper heat sinks. Equipped with an adhesive tape for easy installation

Set 3: 1x Pocket Inverter + 1x cable splitter (1 to 5) + 5x yellow 1-meter El-wires

Module with black and white e-Paper display, diagonal 7.5" and resolution 800x480 px. Communication via SPI interface. Waveshare Pico-ePaper-7.5

Module with NVIDIA Carmel ARM v8.2 processor and Volta graphics chip, consisting of 512 cores supporting CUDA technology. Equipped with 32 GB RAM DDR4 and 64 GB eMMC. Intended for industrial applications. NVIDIA Jetson AGX Xavier Industrial 32 GB 900-82888-0080-000.

Memory card designed for S7-1X00 series controllers. It is powered by 3.3V and has a capacity of 24MB. The card is intended for industrial use. Siemens 6ES7954-8LF03-0AA0

Module with 15 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4415

The 10 W AC adapter provides 5 V and 2 A current. It is equipped with a 1.5 m cable with a 5.5 x 2.1 mm plug. Akyga AK-TB-22

The 10 W AC adapter provides 5 V and 2 A current. It is equipped with a 1 m cable with microUSB plug. Akyga AK-TB-23

Li-Po battery with a rated voltage of 3.7 V and a capacity of 650 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP603040

TMC2209-LA-T, Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A, QFN28