Category: Main categories

Camera with a resolution of 8 MPx with a USB interface. Equipped with CMOS IMX179 sensor with 105° lens, microphone and housing. ArduCAM UB022901

Evaluation set FRDM-HB2001-EVM consisting of FRDM-KL25Z baseplate and extension board with DC motor controller MC33HB2001. NXP FRDM-HB2001-EVM

Module with 8 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4348

PLC from the SIMATIC S7-1200 family. The CPU 1215C CPU powered by 24V DC, has 14 24V DC inputs, 10 outputs 0.5A, 2 inputs and 2 analog outputs 0-10V and the possibility of expansion with additional modules. Siemens 6ES7215-1AG40-0XB0

AMOLED 5.5" display with 1920x1080 resolution and 60Hz refresh rate. The display is equipped with a capacitive touch screen with support for up to 10 points as part of the Multi-touch function. Compatible with Lattepanda, Raspberry Pi and other devices with HDMI output. DFRobot DFR0524

Module with 1 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4101

Module with 1 optocoupler type QTRXL with RC (digital) output. It is supplied with the voltage from 2.9 to 5.5 V, detects objects at a distance of up to 80 mm. Pololu 4541

The ZYBO Z7 board (Zynq Board) is a renewed version of the set containing the programmable system from the Xilinx Zynq-7000 - Z-7020 family. Also includes the Xilinx Zynq SDSoC Voucher. Academic version. Digilent 471-015

Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003

The gas flow rate sensor measures the amount of the flowing medium per unit time. DFRobot SEN0360

A programming platform designed on the basis of the Xilinx system-on-chip system Zynq-7000 (APSoC). The Zynq-7000 architecture integrates the ARM Cortex-A9 667 MHz processor with the Xilinx 7 FPGA chip. Digilent Cora Z7-07S (410-370)

IPS 11.9" LCD display with touch panel dedicated for Raspberry Pi. It is equipped with DSI interface for image display and I2C interface for touch screen. Resolution 1480x320 pixels. Waveshare 11.9inch DSI LCD

Minicomputer with a dual-core processor (up to 2.0 GHz) and 4 GB of LPDDR3 RAM memory, 16 GB of eMMC Flash memory. It has a two-band WiFi 2.4G and 5G module. Supports GPU and VPU acceleration. It has video interfaces in the form of HDMI, as well as USB 3.0, USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyElec NanoPC-T4

Module with 5 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4145

Module with Himax HM-01B0 camera and LoRa communication dedicated to Arduino Portenta H7 boards. Arduino ASX00026

Module with 8-bit ADC and 8-bit DAC. It allows you to measure voltage and generate an analog signal. Communicates via I2C

Single-core, multi-strand wire in black silicone insulation. Thickness 26AWG, length 4m

USB - UART converter based on the FT232RL chip. Compatible with voltages of 3.3 V and 5 V, it has been equipped with a miniUSB connector. Waveshare FT232 USB UART Board (mini)

Altera Cyclone IV EP4CE6E22C8N FPGA development board in the set with the base board and expansion modules. Waveshare OpenEP4CE6-C Package B