Category: Main categories

2 MPx camera module with OV2311 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount. Acrylic housing included. ArduCAM B0221

A 3-port HUB module with a USB 2.0 interface with an RJ45 connector, designed to work with the Raspberry Pi minicomputer. Waveshare ETH/USB HUB HAT (B)

The A2212 2-4S 2700KV BLDC brushless motor is a compact and lightweight electric motor, designed for model making, especially in drones, airplanes, helicopters and other remotely controlled vehicles, offering high efficiency, long life and low energy consumption, while being compatible with LiPo batteries from 2S to 4S

The two-channel DDS signal generator with a range of up to 30MHz offers precise signal generation with DDS technology and a resolution of up to 0.01uHz. The device has 12-bit vertical resolution, 1mV amplitude resolution and an output impedance of 50Ω. Junctek JDS6600-30

A controller designed for the Pololu 3pi+ 2040 robot, it is based on the Raspberry Pi RP2040 microcontroller and a set of sensors. A version for use with an OLED display. Pololu 5006

Module with 3-axis accelerometer and ISM330DHCX gyroscope. Equipped with a STEMMA QT connector, it communicates via the I2C or SPI interface. Adafruit 4502

Single-channel DC motor driver with an operating voltage from 8 to 28 V and a continuous current up to 160 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDS160A

Two-channel DC motor driver powered with the voltage from 2.5 to 12 V with a maximum continuous current of 0.8 A per channel. It can control a bipolar stepper motor

Real time clock (RTC) module PCF8523. It uses the STEMMA QT connector and communicates via the I2C interface. Adafruit 5189

Module for 4 mechanical buttons with LED backlight in the form of NeoPixel diodes. Communicates via I2C. Adafruit 4980

Module with light intensity sensor TSL2591. Equipped with STEMMA QT connector with I2C interface. Adafruit 1980

An upgraded version of Pololu\'s popular mobile robot. It is based on the Raspberry Pi RP2040 microcontroller and features an OLED display and a set of sensors. For self-assembly. Pololu 5005

Module with a 3-axis magnetic field sensor LIS3MDL. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4479

An upgraded version of Pololu\'s popular mobile robot. It is based on the Raspberry Pi RP2040 microcontroller and features an OLED display and a set of sensors. For self-assembly. Pololu 5004

An upgraded version of Pololu\'s popular mobile robot. It is based on the Raspberry Pi RP2040 microcontroller and features an OLED display and a set of sensors. For self-assembly. Pololu 5003

An upgraded version of Pololu\'s popular mobile robot. It is based on the Raspberry Pi RP2040 microcontroller and features an OLED display and a set of sensors. The assembled version. Pololu 5002

Module with a temperature and humidity sensor based on the SHT40 system. Equipped with a STEMMA QT connector, it communicates via the I2C interface. Adafruit 4885

An upgraded version of Pololu\'s popular mobile robot. It is based on the Raspberry Pi RP2040 microcontroller and features an OLED display and a set of sensors. The assembled version. Pololu 5000

Step-Up/Step-Down DC-DC converter module. It has an input voltage of 2.8 to 22 V, an output voltage of 12 V and a maximum output of 2.5 A to 3.5 A. Pololu 4985

Evaluation board with nRF52840 microcontroller and bluetooth communication. Equipped with motion, temperature, light, sound sensors and RGB diodes. Can be programmed in CircuitPython or Arduino IDE. Adafruit 4333