- Out-of-Stock
Pololu 2270 - 4.4:1 Metal Gearmotor 25Dx48L mm HP with 48 CPR Encoder
ID: 558085
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.
Overview:
These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6V motors and three power levels of 12V motors). The gearmotors all have the same 25 mm diameter case and 4 mm diameter gearbox output shaft, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio). All versions are also available with an integrated 48 CPR quadrature encoder on the motor shaft. Please see the 25D metal gearmotor comparison table for detailed specifications of all our 25D metal gearmotors. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application. A more basic comparison table is available below:
| Rated Voltage | Motor Type | Stall Current @ Rated Voltage | No-Load Speed @ Rated Voltage | Approximate Stall Torque @ Rated Voltage |  With Encoder |  Without Encoder |
|---|---|---|---|---|---|---|
| 6 V | high-power (HP) |
6.5 A | 10,000 RPM | 5 oz-in | 1:1 HP 6V w/encoder | |
| 2150 RPM | 20 oz-in | 4.4:1 HP 6V w/encoder | 4.4:1 HP 6V | |||
| 990 RPM | 39 oz-in | 9.7:1 HP 6V w/encoder | 9.7:1 HP 6V | |||
| 460 RPM | 75 oz-in | 20.4:1 HP 6V w/encoder | 20.4:1 HP 6V | |||
| 280 RPM | 90 oz-in | 34:1 HP 6V w/encoder | 34:1 HP 6V | |||
| 200 RPM | 115 oz-in | 47:1 HP 6V w/encoder | 47:1 HP 6V | |||
| 130 RPM | 150 oz-in | 75:1 HP 6V w/encoder | 75:1 HP 6V | |||
| 97 RPM | 210 oz-in | 99:1 HP 6V w/encoder | 99:1 HP 6V | |||
| 56 RPM | 350 oz-in | 172:1 HP 6V w/encoder | 172:1 HP 6V | |||
| 6 V | low-power (LP) |
2.4 A | 6200 RPM | 2 oz-in | 1:1 LP 6V w/encoder | |
| 1300 RPM | 8 oz-in | 4.4:1 LP 6V w/encoder | 4.4:1 LP 6V | |||
| 590 RPM | 17 oz-in | 9.7:1 LP 6V w/encoder | 9.7:1 LP 6V | |||
| 290 RPM | 33 oz-in | 20.4:1 LP 6V w/encoder | 20.4:1 LP 6V | |||
| 170 RPM | 50 oz-in | 34:1 LP 6V w/encoder | 34:1 LP 6V | |||
| 120 RPM | 65 oz-in | 47:1 LP 6V w/encoder | 47:1 LP 6V | |||
| 78 RPM | 95 oz-in | 75:1 LP 6V w/encoder | 75:1 LP 6V | |||
| 58 RPM | 130 oz-in | 99:1 LP 6V w/encoder | 99:1 LP 6V | |||
| 34 RPM | 200 oz-in | 172:1 LP 6V w/encoder | 172:1 LP 6V | |||
| 25 RPM | 220 oz-in | 227:1 LP 6V w/encoder | 227:1 LP 6V | |||
| 15 RPM | 300 oz-in | 378:1 LP 6V w/encoder | 378:1 LP 6V | |||
| 11 RPM | 400 oz-in | 499:1 LP 6V w/encoder | 499:1 LP 6V | |||
| 12 V | high-power (HP) |
5.6 A | 10,200 RPM | 5.5 oz-in | 1:1 HP 12V w/encoder | |
| 2250 RPM | 23 oz-in | 4.4:1 HP 12V w/encoder | 4.4:1 HP 12V | |||
| 1030 RPM | 44 oz-in | 9.7:1 HP 12V w/encoder | 9.7:1 HP 12V | |||
| 500 RPM | 85 oz-in | 20.4:1 HP 12V w/encoder | 20.4:1 HP 12V | |||
| 290 RPM | 120 oz-in | 34:1 HP 12V w/encoder | 34:1 HP 12V | |||
| 210 RPM | 165 oz-in | 47:1 HP 12V w/encoder | 47:1 HP 12V | |||
| 130 RPM | 240 oz-in | 75:1 HP 12V w/encoder | 75:1 HP 12V | |||
| 100 RPM | 300 oz-in | 99:1 HP 12V w/encoder | 99:1 HP 12V | |||
| 12 V | medium-power (MP) |
2.1 A | 7800 RPM | 2.7 oz-in | 1:1 MP 12V w/encoder | |
| 1700 RPM | 11 oz-in | 4.4:1 MP 12V w/encoder | 4.4:1 MP 12V | |||
| 770 RPM | 22 oz-in | 9.7:1 MP 12V w/encoder | 9.7:1 MP 12V | |||
| 370 RPM | 42 oz-in | 20.4:1 MP 12V w/encoder | 20.4:1 MP 12V | |||
| 220 RPM | 63 oz-in | 34:1 MP 12V w/encoder | 34:1 MP 12V | |||
| 160 RPM | 85 oz-in | 47:1 MP 12V w/encoder | 47:1 MP 12V | |||
| 100 RPM | 125 oz-in | 75:1 MP 12V w/encoder | 75:1 MP 12V | |||
| 76 RPM | 165 oz-in | 99:1 MP 12V w/encoder | 99:1 MP 12V | |||
| 43 RPM | 250 oz-in | 172:1 MP 12V w/encoder | 172:1 MP 12V | |||
| 33 RPM | 320 oz-in | 227:1 MP 12V w/encoder | 227:1 MP 12V | |||
| 12 V | low-power (LP) |
1.1 A | 5600 RPM | 2 oz-in | 1:1 LP 12V w/encoder | |
| 1200 RPM | 8 oz-in | 4.4:1 LP 12V w/encoder | 4.4:1 LP 12V | |||
| 560 RPM | 15 oz-in | 9.7:1 LP 12V w/encoder | 9.7:1 LP 12V | |||
| 260 RPM | 29 oz-in | 20.4:1 LP 12V w/encoder | 20.4:1 LP 12V | |||
| 150 RPM | 43 oz-in | 34:1 LP 12V w/encoder | 34:1 LP 12V | |||
| 110 RPM | 60 oz-in | 47:1 LP 12V w/encoder | 47:1 LP 12V | |||
| 71 RPM | 85 oz-in | 75:1 LP 12V w/encoder | 75:1 LP 12V | |||
| 55 RPM | 115 oz-in | 99:1 LP 12V w/encoder | 99:1 LP 12V | |||
| 31 RPM | 180 oz-in | 172:1 LP 12V w/encoder | 172:1 LP 12V | |||
| 23 RPM | 240 oz-in | 227:1 LP 12V w/encoder | 227:1 LP 12V | |||
| 14 RPM | 320 oz-in | 378:1 LP 12V w/encoder | 378:1 LP 12V | |||
Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. For these gearboxes, the recommended upper limit for instantaneous torque is 200 oz-in (15 kg-cm); we strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially on the order of a second) thermal damage to the motor windings and brushes, especially for the versions that use high-power (HP) motors; a general recommendation for brushed DC motor operation is 25% or less of the stall current.
In general, these kinds of motors can run at voltages above and below their nominal voltages; lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor.
Dimensions:
| Size: | 25D x 60L mm |
|---|---|
| Weight: | 95 g |
| Shaft diameter: | 4 mm |
General specifications:
| Gear ratio: | 4.4:1 |
|---|---|
| Free-run speed @ 6V: | 2150 rpm |
| Free-run current @ 6V: | 550 mA |
| Stall current @ 6V: | 6500 mA |
| Stall torque @ 6V: | 20 oz·in |
| Lead length: | 8 in1 |
| Motor type: | 6.5A stall @ 6V (HP 6V) |
| Encoders?: | Y |
Notes:
- 1 May vary by a few inches.
558085
Data sheet
- DC motor power
- HP
- Gear material
- Metal
- Gear ratio
- 4.4:1
- Rotation speed
- 2150RPM
- Shaft diameter
- 4 mm
- Shaft shape
- D
- Obustronny wał silnika
- Tak
- Power supply voltage
- 6V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Dual VNH3SP30 Motor Driver Carrier MD03A
zł1,136.89
24h
Available quantity: 2
Available
Adapter that allows you to easily mount the wheels on a motor with a shaft diameter of 4 mm using screws size 4-40. The hub fits both round and D-shaped shafts. Pololu 1081
zł42.03
Delivery date unknown
No product available!
Pololu Universal Aluminum Mounting Hub for 4mm Shaft, M3 Holes (2-Pack)
zł48.94
Delivery date unknown
No product available!
A set of adapters (adapter) from the popular 4 mm to 12 mm motor shaft, wheel holders from RC models. Pololu 2684
zł31.24
24h
Available quantity: 2
Available
These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and twelve mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options.
zł50.41
24h
Available quantity: 3
Available
Other products in the same category (16)
The Arduino Ethernet Shield 2 allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip. The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. There is an onboard micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Uno and Mega
Retired
No product available!
No product available!
The housing for the Odroid XU4 minicomputer in blue. The housing protects the computer against dust and mechanical damage.
Retired
No product available!
No product available!
Dov M. Gabbay, Paul Thagard, John Woods, Cliff Hooker, John Collier
Delivery date unknown
No product available!
No product available!
No product available!
No product available!
The PCF8574 IO expansion board is an 8-bit I / O expander controlled by the I2C interface. Up to 8 PCF8574 IO expansion cards can be connected to the I2C bus, providing up to 64 I / O ports. Waveshare 3708
Retired
No product available!
Assembled solar collector differential controller. AVT5621 C
Retired
No product available!
Multifunctional robot with 2WD chassis and controller in the form of a Raspberry Pi minicomputer. It is a universal mobile platform that can, for example, avoid obstacles or detect objects using a camera. Pimoroni PIM598
Retired
No product available!
HK Quanum 4008 Precision Brushless Gimbal Motor (Nex5 size 400-800g) (42249)
Retired
No product available!
No product available!
No product available!
The left Mecanum multi-directional wheel with a diameter of 80 mm, which consists of 9 rollers located around the circumference of the wheel. The wheel hub fits the popular TT motors
Retired
No product available!
No product available!
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 4.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 211.2 counts per revolution of the gearbox’s output shaft.