MDDS30 SmartDrive DC Motor Driver 30A 7V-35V - 2-channel driver for DC motors
ID: 578284
zł349.00
Tax included
zł283.74 tax excl.
Two-channel DC motor driver with an operating voltage from 7 to 35 V and a maximum continuous current of 30 A. It can be controlled by an analog signal, PWM, UART, RC signal or by means of built-in buttons. Cytron MDDS30
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Dual-channel DC motor driver. It allows you to control the movement of motors with a supply voltage from 7 to 35 V and a current consumption of up to 30 A (continuous current). Control can be done via analog signal, PWM, UART interface or by means of built-in buttons, which allow very easy testing of drives without the need to connect a controller. The module can also be connected directly to the RC receiver and remotely control the movement of the motors using the RC apparatus. The controller can work with 3.3 V and 5 V systems, making it compatible with all popular development boards. In the GitHub repository, the Arduino library is available along with the user manual.
Features
- Dual-channel DC motor driver
- The motor supply voltage is from 7 V to 35 V
- Maximum continuous current up to 30 A and instantaneous 80 A
- Control voltage 3.3 V or 5 V
- LED indicators for operating status and errors
- Protection against overheating, overload
- Screw connection for power and motor connection
- Control buttons
- Built-in heat sink
- Analog interface, PWM, UART, RC
- Speed control by PWM signal up to 18 kHz
- Dimensions: 81.28 x 101.6 x 42 mm
Kit contains
- SmartDrive DC Motor Driver 30A 7V-35V
- 2 x Grove 4-pin cable 20 cm
- 2 x 2561 3-pin connector
578284
Data sheet
- Output current
- 30 A
- Number of channels
- 2
- Supply voltage min
- 7
- Supply voltages max
- 35 V
You might also like
Two-channel driver for DC motors with an operating voltage from 7 to 35 V and a continuous current up to 10 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS10
zł278.32
24h
Available quantity: 3
Available
Two-channel driver of direct current (DC) motors with an operating voltage from 5 to 30 V and a maximum continuous current of 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron MDD10A
zł99.99
24h
Available quantity: 4
Available
Shield with dual-channel DC motor driver for Arduino. It has an operating voltage from 7 to 30 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron SHIELD-MDD10
zł119.00
24h
Available quantity: 4
Available
6-channel transmitter (RC apparatus) 2.4 GHz Flysky FS-i6 with LCD display in set with receiver FS-IA6 with telemetry support. 6V power supply (4 x AA battery). Left-hand throttle (right-handed version). Flysky FS-i6
zł284.60
Delivery date unknown
No product available!
Two-channel driver for DC motors with an operating voltage from 7 to 45 V and a continuous current of up to 60 A. It can be controlled by an analog signal, PWM, UART, RC or by means of built-in buttons. Cytron MDDS60
zł867.47
Delivery date unknown
No product available!
Other products in the same category (16)
DC motor driver with voltage 6.5..40V and maximum continuous current 21A. It has the ability to easily implement the feedback loop and numerous control interfaces. Polol 3149
zł933.32
24h
Available quantity: 1
Available
Module with a 2-channel driver for DC motors L293D designed to work with the Raspberry Pi Pico. It can work with a voltage from 6 to 12 V and a current of up to 600 mA. SB Components 21468
zł85.90
24h
Available quantity: 4
Available
The pad for use with shallow Feather series contains two TB6612 chips that allow you to control DC motors or stepper motors. The I2C interface is used to communicate with the overlay. Adafruit 2927
zł117.62
24h
Available quantity: 6
Available
Single-channel DC motor controller that allows the motor to be controlled with a voltage range of 6-30V and a current of up to 13A. Allows engine speed control using PWM signals. Cytron MD13S
zł59.90
24h
Available quantity: 47
Available
A single-channel DC motor controller with an I2C interface. It is powered from 1.8 V to 22 V and can deliver up to 1.8 A of current. Board with soldered connectors. Pololu 5074
zł65.78
24h
Available quantity: 2
Available
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with connectors for assembly. Pololu 5052
zł295.54
6 weeks
No product available!
DC motor driver that allows you to control the movement of two drives using the I2C interface. Board with soldered connectors. Pololu 5040
zł295.54
6 weeks
No product available!
Module with two DRV8830 DC motor drivers. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 105020010
zł65.28
24h
Available quantity: 1
Available
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3×0.8″ board supports a wide 6.5V to 40V voltage range and is efficient enough to deliver a continuous 13A without a heat sink. Driver includes reverse-voltage protection along with basic current sensing and current limiting functionality. Pololu 2992
zł173.75
6 weeks
No product available!
Pololu High-Power Motor Driver 24v20
zł236.02
24h
Available quantity: 1
Available
HAT with two-channel DC motor driver for Raspberry Pi. It has an operating voltage from 6 to 24 V and a continuous current of up to 10 A. It can be controlled by a PWM signal or by means of built-in buttons. Cytron HAT-MDD10
zł117.32
24h
Available quantity: 2
Available
Module with 2-channel DC motor driver. It allows you to control the drive with a supply voltage from 3 to 11 V and a current of 1.2 A (1.5 A instantaneous). I2C communication. SparkFun ROB-15451
zł88.20
4 weeks
No product available!
This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink.
zł660.26
24h
Available quantity: 2
Available
Dual motor controller allowing two DC motors to be driven with voltages from 4.5 to 13.5V and a continuous current of 1.2 A per channel. SparkFun ROB-14450
zł73.10
24h
Available quantity: 1
Available
No product available!
Pololu High-Power Motor Driver 36v9
zł275.16
24h
Available quantity: 1
Available
Two-channel DC motor driver with an operating voltage from 7 to 35 V and a maximum continuous current of 30 A. It can be controlled by an analog signal, PWM, UART, RC signal or by means of built-in buttons. Cytron MDDS30