New products
New products New products
Available
zł73.14
24h
Available
zł1,049.01
24h
Available
Sparkfun Openlog
ID: 561610
5906623417605
zł81.20
Tax included
zł66.02 tax excl.
The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. DEV-13712
Description
The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog can store or “log” huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates, for scientific or debugging purposes.
The SparkFun OpenLog runs off of an onboard ATmega328, running at 16MHz thanks to the onboard crystal.The OpenLog draws 6mA when recording a 512 byte buffer, but as that process takes a fraction of a second, the average current draw is closer to 5mA. Keep in mind though that if you are recording a constant data stream at 115200bps, you will approach that 6mA limit. All data logged by the OpenLog is stored on the microSD card that involve the features of 64MB to 64GB capacity and FAT16 or FAT32 file type.
Note: The latest version of the firmware (included with this board) does not compile in Arduino 1.6.7. You will need to compile in 1.6.5.
Features
- VCC Input: 3.3V-12V (Recommended 3.3V-5V)
- Log to low-cost microSD FAT16/32 cards up to 64GB
- Simple command interface
- Configurable baud rates (up to 115200bps)
- Preprogrammed ATmega328 and bootloader
- Four SPI pogo pins
- Two LEDs indicate writing status
- 2mA idle, 6mA at maximum recording rate
561610
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
IEPE sensor data logger with a built-in web server, four analog inputs, and 24-bit resolution. Digilent 6069-410-006-1
zł7,630.55
3 weeks
No product available!
Data logger pre-programmed to automatically log data from Qwiic sensors. It is designed for users who need to collect a lot of data into a CSV or JSON file. Data can be saved to a microSD card or sent wirelessly to an Internet of Things (IoT) service. SparkFun DEV-22462
zł306.29
3 weeks
No product available!
Data logger for thermocouple sensors with a built-in web server, 16 measurement inputs, and 24-bit resolution. Digilent 6069-410-005-1
zł6,123.80
3 weeks
No product available!
Data logger dedicated to micro:bit. It connects to the module via the UART interface and allows you to save data on a microSD card. SparkFun DEV-15270
zł73.80
24h
Available quantity: 1
Available
A universal set of tools for conducting scientific experiments. It consists of the Gravity module: Science Data Acquisition (SCI DAQ) and sensors: soil moisture, VEML7700 light, SHT31-F temperature and humidity, and ENS160 air quality. DFRobot EDU0170
zł459.00
24h
Available quantity: 2
Available
Compact expansion with advanced data monitoring features, equipped with temperature, humidity, light sensors and RTC clock. With low power consumption, battery monitoring function and I2C protocol support, it is ideal for long-term battery-powered projects, offering precise measurements and efficient power management. Seeed Studio 114993446
zł46.70
24h
Available quantity: 5
Available
Data logger based on the ATmega328 microcontroller. Data received via the I2C interface are saved on the microSD card. The module supports cards with a capacity of up to 32 GB. SparkFun DEV-15164
zł102.25
3 weeks
No product available!
Data logger dedicated to Thing Plus tiles. It allows you to save data on a microSD card with the possibility of reading through the USB port. Supports cards up to 32 GB. SparkFun DEV-19217
zł158.78
24h
Available quantity: 1
Available
Data logger pre-programmed to automatically record data from IMU, GPS and Qwiic series sensors. SparkFun DEV-16832
zł218.40
24h
Available quantity: 2
Available
Data logger with USB type C connector. Data is received via the UART interface and saved on the built-in Flash memory with a capacity of 128 MB. DFRobot TEL0147
zł54.32
24h
Available quantity: 1
Available
Set with OpenLog Artemis data logger. The set includes an I2C expander, a strain gauge module, a USB type C cable, a 1250 mAh LiPo battery, a 1 GB microSD card and all the necessary Qwiic cables. SparkFun KIT-18295
zł710.09
3 weeks
No product available!
Data logger with LPC2148 chip and microSD card support. The module is equipped with a microUSB connector, Li-Pol battery charger and a microSD card slot. SparkFun WIG-12772
zł373.32
24h
Available quantity: 1
Available
Data logger dedicated to Feather plates. Equipped with RTC clock, battery slot and micro SD card slot. Adafruit 2922
zł47.17
24h
Available quantity: 2
Available
Data logger dedicated to monitoring and analysing electrical signals. It enables easy and precise data collection from a variety of sources, including power systems, industrial automation and other applications. It is powered by a rechargeable battery and has built-in Bluetooth communication. Hantek 365C
zł469.00
24h
Available quantity: 3
Available
Data logger programmed to automatically record data from GPS and Qwiic series sensors. SparkFun DEV-19426
zł171.09
24h
Available quantity: 2
Available
Universal data logger with a built-in web server, four analog inputs, and 24-bit resolution. Digilent 6069-410-007-1
zł7,630.55
3 weeks
No product available!
The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. DEV-13712