PCIe-to-SATA 4-port expander for SATA 3.0 (Packet-Switch-4P) - Waveshare 22247
ID: 1181059
5906623423064
zł98.29
Tax included
zł79.91 tax excl.
4-channel PCIe to SATA 3.0 port expander. It can be powered with 12 V via a PCIe connector or 5/12 V via an external DC connector. Waveshare PCIe-TO-SATA-4P
Description
Port expander with PCle Gen3 x1 input and 4 SATA 3.0 connectors. It uses the ASM1064 controller. It can be powered with 12 V via a PCIe connector or 5/12 V via an external DC connector. On the board there are LED indicators that light up when the disk is plugged in and flash during data transmission.
Intended, among others to work with CM4 IO Board expansion boards for Raspberry Pi Compute Module 4. Full documentation with examples of use is available on the product page.
Features
- Supports single-channel PCI Express
- Four power saving modes L0s / L1 / L23 / L3
- Supports L1 substate deep power saving mode
- Supports SRIS, AER, LTR
- Supports SATA LED
- Supports NCQ and AHCI SPEC 1.4.
- Four SATA3.0 ports (6 Gb / s)
- Supports partial / inactive SATA interface power management
- Supports SATA 5V and 12V hard drives (2.5 "and 3.5" hard drives), but does not support M.2 interface
- ASM1184 controller
- Works with CM4 IO Board
- Power supply: 12V via PCIe or 5/12 V DC
- Dimensions: 82 x 39 mm
Kit contains
- PCIe-TO-SATA-4P
- Scerws
- SATA adapter
1181059
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
SATA III cable, 50 cm long, with a connector at a 90° angle. Akyga AK-CA-51
zł3.51
24h
Available quantity: 10
Available
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
zł175.00
Delivery date unknown
No product available!
GOODRAM CX400 gen. 2 SSD with a capacity of 128 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-128-G2
zł96.86
Delivery date unknown
No product available!
GOODRAM CX400 gen. 2 SSD with a capacity of 256 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-256-G2
zł97.54
Delivery date unknown
No product available!
GOODRAM CX400 gen. 2 SSD with a capacity of 512 GB. It is equipped with a SATA III interface, has a 2.5" format. Goodram SSDPR-CX400-512-G2
zł199.00
Delivery date unknown
No product available!
4-channel PCIe port expander. It can be powered with 12 V via a PCIe connector or an external DC connector. Waveshare PCIe-Packet-Switch-4P
zł102.63
24h
Available quantity: 3
Available
Other products in the same category (16)
DFRobot DFR1193 module with the LTC4316 chip enables the simultaneous use of multiple identical I2C sensors without address conflicts. It supports quick configuration via DIP switches or resistors, offering a flexible and reliable solution for IoT, robotics, and automation projects.
zł28.83
24h
Available quantity: 4
Available
32-channel IO expander with 7 analog inputs with 10-bit resolution. Communicates via USB interface. It has compact dimensions, making it suitable for small devices. Version with connector on top. Numato Lab GP320002
zł499.00
3 weeks
No product available!
8-channel I2C expander module based on the TCA9548A system. The module has Qwiic connectors and allows communication with many I2C devices that have the same address. Sparkfun BOB-16784
zł70.31
24h
Available quantity: 1
Available
Module with 4 digital inputs, 4 outputs and 6 analog inputs. It communicates via the RS485 interface and supports the Modbus RTU protocol. The board is enclosed in an industrial housing. Wellpro WP9039ADAM
zł317.40
24h
Available quantity: 2
Available
DAQ device based on USB communication and equipped with 8 counter inputs, 4 PWM outputs and 8 digital IOs. Digilent 6069-410-028
zł2,784.22
3 weeks
No product available!
64-channel IO expander with 32 analog inputs. It communicates via the USB interface. Numato Lab GP640001
zł953.00
3 weeks
No product available!
The KAmod I2C-IOexp16 module is an extension equipped with 16 programmable digital lines (inputs or outputs), based on the MCP23017 system and controlled via the I2C bus with the possibility of connecting up to 8 modules thanks to addressing. The module works with a voltage from 2 to 5 V, has an interrupt output and allows for a current flow of up to 20 mA on each line
zł18.91
24h
Available quantity: 27
Available
16-channel IO expander with 10 analog inputs. The board communicates via the Ethernet interface. Numato Lab GPETH160001
zł330.81
24h
Available quantity: 3
Available
16-channel IO expander with 14 analog inputs. Communicates via the WiFi wireless interface. Numato Lab GPWIFI160001
zł687.31
3 weeks
No product available!
8-channel I2C expander module based on the PCA9548 chip. Allows communication with multiple I2C devices that have the same address. Equipped with STEMMA QT connectors. Adafruit 5626
zł34.72
24h
Available quantity: 3
Available
I2C multiplexer module with TCA9548A system. Allows you to connect up to 8 devices. The system works like a gateway - it transmits I2C interface data to one of the 8 main busses. This allows you to connect up to 8 devices with the same address. Adafruit 2717
zł35.03
4 weeks
No product available!
Module with 16-channel I/O ports expander controlled by the I2C interface. It was based on the MCP23017 chip. Waveshare MCP23017 IO Expansion Board
zł27.72
24h
Available quantity: 36
Available
DAQ device based on USB communication and equipped with 96 digital inputs/outputs and a 32-bit counter. Digilent 6069-410-032
zł2,898.08
3 weeks
No product available!
Module with an IO pin expander based on the TCA9534 system. It allows you to add 8 GPIO pins to an I2C-controlled project. SparkFun DEV-17047
zł31.65
24h
Available quantity: 1
Available
KAmod I2C Hub4 enables splitting the I2C bus into four independent outputs with a voltage level translation function, eliminating address conflicts and increasing connection flexibility. The module is intended for projects with multiple I2C devices requiring separation or diverse supply voltages.
zł14.40
24h
Available quantity: 200
Available
RS485 hub with DIN rail mounting capability. It is equipped with one RS485 input port and 8 RS485 output ports. Designed for communication within industrial networks. Waveshare RS485-HUB-8P
zł195.96
4 weeks
No product available!
4-channel PCIe to SATA 3.0 port expander. It can be powered with 12 V via a PCIe connector or 5/12 V via an external DC connector. Waveshare PCIe-TO-SATA-4P